User Manual

Instrument Functions
R&S
®
NGE100B
30User Manual 5601.1343.02 ─ 04
Function keys Description
Voltage Sets the output voltage for the channel. See "Set output voltage and current"
on page 36.
Current Sets the output current limit for the channel. See "Set output voltage and current"
on page 36.
Track Configures the tracking function. See Chapter 5.4.2, "Tracking Function",
on page 37.
Menu Main menu of the instrument. See Chapter 5.1.5, "Menu", on page 33.
Long press on Menu key to capture screenshot on the USB stick. The default
screenshot filename starts with a prefix nge100_scr_ follows by an ascending
index 000-999 (e.g. nge100_scr_001.bmp).
Remote Long press on Remote key to switch from remote to local control mode.
Fuse Toggles the fuse on/off. See Chapter 5.5.2, "Fuse", on page 43.
Navigation keys
These keys provide navigation control in the instrument.
Function keys Description
Enter Confirms menu selection or entry in dialog boxes.
Start and stop (long press) the EasyArb function. See Chapter 5.5.3, "EasyArb",
on page 44.
Back
Returns to the previous menu level or exit the menu mode.
In the menu dialog, press the Back key to discard changes and restore the previ-
ous value.
In the channel display area, press the Back key to exit editing mode and keep the
changes made.
In a 2 channel instrument, long press on Back key also reset the channel history
information. See Table 5-3
5.1.3 Virtual Keyboard
The virtual keyboard is an on-screen keyboard to input symbols and alphanumeric
characters in the input field. It can be invoked wherever there is an input field.
User Interface