User Manual

Instrument Functions
R&S
®
NGE100B
26User Manual 5601.1343.02 ─ 04
5 Instrument Functions
The following chapters describe the operating procedures of the R&S NGE100B user
interface and functions.
5.1 User Interface
This chapter describes how you can interact with R&S NGE100B via the various keys,
menus and navigation controls in the instrument.
5.1.1 Screen Layout
Figure 5-1: Screen layout for 3-channel or 2-channel instrument
Status bar
Table 5-1: Status bar function
Function Description
EasyArb Arbitrary output sequences on Ch 1.
EasyRamp Output voltage to ramp continuously within a 10 ms to 10 s until set volt-
age, V
set
.
DIO:xxxx Digital Trigger I/O (Digital Trigger I/O option NGE-K103 must be installed).
The "xxxx" refers to I/O status for DIO1, DIO2, DIO3, DIO4.
Wireless LAN connection (WLAN option R&S NGE-K102 must be instal-
led).
LXI Wired LAN connection with LXI service for remote control operation
(Ethernet option R&S NGE-K101 must be installed).
User Interface