User Manual

Quick Start
R&S
®
NGE100B
20User Manual 5601.1343.02 ─ 04
4.2 Instrument Tour
This chapter provides an overview of all the controls available in the R&S NGE100B
models and steps to switch on the instrument for the first time.
● Overview of Controls...............................................................................................20
● Switching On the Instrument...................................................................................23
4.2.1 Overview of Controls
4.2.1.1 Front Panel
The front panel of the R&S NGE100B is as shown in Figure 4-3. The function keys and
navigation controls are located at the right side of the display. The various connectors
are located below the display and function keys.
Figure 4-3: Front panel of R&S NGE100B
1 = Display
2 = Function keys
3 = Rotary knob and arrow keys
4 = Output channels (three for NGE103B and two for NGE102B)
5 = USB connector
6 = Power key
Display
The display is a color LCD screen. Depending on the instrument type, up to three
channels are shown on the screen. The respective measurement settings and func-
tions are displayed in the individual channel section. There is a status bar above the
channels to show whether a certain function is enabled, disabled or operating in a cer-
tain mode.
Instrument Tour