Datasheet

2
Technical Data
Accessories supplied:
Line cord, Operating manual, CD, Software
Recommended accessories:
HO730 Dual-Interface Ethernet/USB
HO740 InterfaceIEEE-488(GPIB),galvanicallyisolated
HZ13 Interfacecable(USB)1.8m
HZ14 Interfacecable(serial)1:1
HZ20 Adapter, BNC to 4mm banana
HZ24 Attenuators50Ω(3/6/10/20dB)
HZ33 Testcable50Ω,BNC/BNC,0.5m
HZ34 Testcable50Ω,BNC/BNC,1.0m
HZ42 19“Rackmountkit2RU
HZ72 IEEE-488(GPIB)Cable2m
Trigger sources immediate(continous),internal,external
(positiveornegativeslope)
Marker adjustable to any frequency between
f
start
and f
stop
Modulation
Modulation types AM, FM, PM, FSK, PWM
Waveform carrier all(exceptpulse)
Internalmodulation(waveform) sine,square(50%),ramp(pos.,neg.),
triangle(50%),noise(white,pink),
cardinalsine,exponential(rise,fall),
arbitrary up to 4,096 points
Internal modulation frequency 10µHzto50kHz
Externalmodulationbandwidth
(-3dB) DCto50kHz(250kSa/ssamplingrate)
Amplitude modulation (AM)
Depth 0% to 100%
Source internal(basicwaveforms,arbitrary),
external
Frequency modulation (FM)
Deviation 10 µHz to 10 MHz
Source internal(basicwaveforms,arbitrary),
external
Phase modulation (PM)
Deviation -180° to +180°
Source internal(basicwaveforms,arbitrary),
external
Frequency shift key modulation (FSK)
Duty cycle 0% to 100%
Rate 0Hzto250kHz
Hop any frequency within the carrier signal’s
range
Source internal(basicwaveforms,arbitrary),
external
Pulse width modulation (PWM)
Deviation 0% to 49.99% of pulse width
Source internal(basicwaveforms,arbitrary),
external
Connectors
External trigger / gate
Connector BNCsocket(frontpanel)
Impedance 5kΩ||100pF
Polarity positive, negative slope
Level TTL, protected up to ±30 V
Pulse width min. 100 ns
Trigger output
Connector BNCsocket(frontpanel)
Impedance 50Ω
Level TTL, positive slope
Frequency max.10MHz
Modulation input
Connector BNCsocket(rearpanel)
Impedance 10kΩ
Voltage level max.±5Vfull-scale
Bandwidth(-3dB) DCto50kHz(250kSa/ssamplingrate)
Frequency reference input
Connector BNCsocket(rearpanel)
Impedance 1kΩ
Frequency range 10MHz±100kHz
Level TTL
Frequency reference output
Connector BNCsocket(rearpanel)
Impedance 50Ω
Frequency 10MHz(norm.)
Level 1.65 V
PP
(into50Ω)
Sweep output
Connector BNCsocket(rearpanel)
Impedance 200Ω
Level 0 V to 5 V ramp synchronous with
frequency sweeps
Interfaces
for mass storage 1xUSB-host(typeA),FAT16/32
for remote control HO720 dual interface:
RS-232/USB-device(typeB)
Optional interfaces HO730 dual interface:
Ethernet(RJ45)/USB-device(typeB)
HO740interface:IEEE-488(GPIB)
Save and recall oninternalfilesystem(upto4MB)or
externalUSBmemory(max.4GB)
General Characteristics
Display
screen size / type
8.9cm(3.5”)QVGAcolorTFT
resolution 320x240
backlight LED
Real-timeclock(RTC) date and time
Power supply
AC supply 105 V to 253 V, 50 Hz to 60 Hz, CAT II
power consumption 30W(typ.)
Safety safetyclassI(EN61010-1)
Temperature
operating temperature range +5°C to +40 °C
storage temperature range -20°C to +70 °C
Rel. humidity 5%to80%(withoutcondensation)
Mechanical data
dimensions(WxHxD) 285x75x365mm
weight 3.6kg
All specifiactions at 23°C after 30 minutes warm-up