Datasheet

Technical Data

Key facts

❙ Frequency range: 10 m Hz to 12.5 MHz

❙ Output voltage: 10 mV

to 10 V

(into 50 Ω)

❙ Waveforms: Sine wave, square wave, triangle, pulse, sawtooth, arbitrary

❙ Rise and fall time <10 ns

❙ Pulse width adjustment: 100 ns to 80 s

❙ Arbitrary waveform generator 40 MSa/s

❙ Burst, gating, external triggering, sweep

❙ Free of charge software for remote control and for creation of arbitrary waveforms

❙ External amplitude modulation (bandwidth 20 kHz)

❙ Intuitive operation with one touch of a button – quick change of signals

❙ Galvanically isolated USB/RS-232 dual-interface, optional IEEE-488 (GPIB)

HM8150

Function Generator

Technical Data

PD 5210.8737.32 - 01.00

PAGE 1
HM8150 Function Generator Technical Data PD 5210.8737.32 - 01.00 Technical Data Key facts ❙❙ Frequency range: 10m Hz to 12.
PAGE 2
Technical Data Max. input voltage ±30 V Outputs Signal output BNC connector, short circuit proof, ext. voltage up to ±15 V HM8150 Impedance 50 Ω All data valid at 23 °C after 30 minutes warm-up. Output voltage 12,5 MHz Arbitrary Funktionsgenerator Frequency Range 1 2,1 to 20 Vpp (open circuit) Range 10 mHz to 12,5 MHz Range 2 0,21 to 2,0 Vpp (open circuit) Resolution 5 digit, max.
PAGE 3
Safety Class Safety Class I (EN61010-1) Power supply 115 to 230 V ±10 %; 50 to 60 Hz, CAT II Power consumption ca. 20 W Operating temperature +5 to +40 °C Storage temperature -20 to +70 °C Rel. humidity 5 to 80 % (non condensing) Dimensions (W x H x D) 285 x 75 x 365 mm Weight approx. 5 kg Accessories supplied: Line cord, Operating manual, CD, Software Recommended accessories: HO880 Interface IEEE-488 (GPIB), galvanically isolated HZ13 Interface cable (USB) 1.