Datasheet
Version 01.00, December 2016
4 Rohde & Schwarz R&S
®
FPC1000 Spectrum Analyzer
Specifications
Specifications apply under the following conditions:
15 minutes warm-up time at ambient temperature, specified environmental conditions met, calibration cycle adhered to.
Data without tolerances: typical values only. Data designated as “nominal” applies to design parameters and is not tested. Data
without tolerance limits is not binding.
Frequency
Frequency range
R&S
®
FPC1000
5 kHz to 1 GHz
with R&S
®
FPC-B2 option
5 kHz to 2 GHz
with R&S
®
FPC-B3 option
5 kHz to 3 GHz
Frequency resolution
1 Hz
Reference frequency, internal
Aging per year
1 × 10
–6
Temperature drift
0 °C to +30 °C
1 × 10
–6
+30 °C to +50 °C
3 × 10
–6
Achievable initial calibration accuracy
5 × 10
–7
Total reference uncertainty
(time since last adjustment × aging rate) +
temperature drift + calibration accuracy
Frequency readout
Marker resolution
0.1 Hz
Uncertainty
±(marker frequency × reference
uncertainty + 10 % × resolution bandwidth
+ ½ (span / (sweep points – 1)) + 1 Hz)
Number of sweep (trace) points
1183
Marker tuning frequency step size
span/1182
Frequency counter resolution
0.1 Hz
Count uncertainty
SNR > 25 dB
±(frequency × reference uncertainty +
½ (last digit))
Frequency span
0 Hz, 10 Hz to 1 GHz
with R&S
®
FPC-B2 option
0 Hz, 10 Hz to 2 GHz
with R&S
®
FPC-B3 option
0 Hz, 10 Hz to 3 GHz
Span uncertainty
nominal 1 %
Spectral purity SSB phase noise
f = 500 MHz
Carrier offset
30 kHz
< –88 dBc (1 Hz), –92 dBc (1 Hz) (typ.)
100 kHz
< –98 dBc (1 Hz), –103 dBc (1 Hz) (typ.)
1 MHz
< –120 dBc (1 Hz), –125 dBc (1 Hz) (typ.)
Sweep time
Sweep time
span = 0 Hz
100 µs to 100 s
10 Hz ≤ span ≤ 600 MHz
10 ms to 1000 s
span > 600 MHz
10 ms × span/600 MHz to 1000 s
Uncertainty
span = 0 Hz
nominal 1 %
span ≥ 10 Hz
nominal 3 %
Bandwidth
Resolution bandwidths
Range
–3 dB bandwidth
1 Hz to 3 MHz in 1/3 sequence
Bandwidth accuracy
1 Hz ≤ RBW ≤ 300 kHz
nominal < 5 %
300 kHz < RBW ≤ 1 MHz
nominal < 10 %
Selectivity 60 dB:3 dB
nominal < 5 (Gaussian type filters)
Video filters
Range
–3 dB bandwidth
1 Hz to 3 MHz in 1/3 sequence