® R&S FPC1000 Spectrum Analyzer Getting Started (;ÜYH2) Getting Started 1178.4124.
This document describes the following products: ● R&S®FPC1000 (1328.6660.02) © 2017 Rohde & Schwarz GmbH & Co. KG Mühldorfstr. 15, 81671 München, Germany Phone: +49 89 41 29 - 0 Fax: +49 89 41 29 12 164 Email: info@rohde-schwarz.com Internet: www.rohde-schwarz.com Subject to change – Data without tolerance limits is not binding. R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG. Trade names are trademarks of their owners.
Basic Safety Instructions Always read through and comply with the following safety instructions! All plants and locations of the Rohde & Schwarz group of companies make every effort to keep the safety standards of our products up to date and to offer our customers the highest possible degree of safety. Our products and the auxiliary equipment they require are designed, built and tested in accordance with the safety standards that apply in each case.
Basic Safety Instructions Symbol Meaning Symbol Meaning Caution ! Hot surface Alternating current (AC) Protective conductor terminal To identify any terminal which is intended for connection to an external conductor for protection against electric shock in case of a fault, or the terminal of a protective earth Direct/alternating current (DC/AC) Earth (Ground) Class II Equipment to identify equipment meeting the safety requirements specified for Class II equipment (device protected by double or rei
Basic Safety Instructions Operating states and operating positions The product may be operated only under the operating conditions and in the positions specified by the manufacturer, without the product's ventilation being obstructed. If the manufacturer's specifications are not observed, this can result in electric shock, fire and/or serious personal injury or death. Applicable local or national safety regulations and rules for the prevention of accidents must be observed in all work performed. 1.
Basic Safety Instructions 6. The product may be operated only from TN/TT supply networks fuse-protected with max. 16 A (higher fuse only after consulting with the Rohde & Schwarz group of companies). 7. Do not insert the plug into sockets that are dusty or dirty. Insert the plug firmly and all the way into the socket provided for this purpose. Otherwise, sparks that result in fire and/or injuries may occur. 8.
Basic Safety Instructions 2. Before you move or transport the product, read and observe the section titled "Transport". 3. As with all industrially manufactured goods, the use of substances that induce an allergic reaction (allergens) such as nickel cannot be generally excluded.
Basic Safety Instructions 2. Adjustments, replacement of parts, maintenance and repair may be performed only by electrical experts authorized by Rohde & Schwarz. Only original parts may be used for replacing parts relevant to safety (e.g. power switches, power transformers, fuses). A safety test must always be performed after parts relevant to safety have been replaced (visual inspection, protective conductor test, insulation resistance measurement, leakage current measurement, functional test).
Instrucciones de seguridad elementales 3. If you use the product in a vehicle, it is the sole responsibility of the driver to drive the vehicle safely and properly. The manufacturer assumes no responsibility for accidents or collisions. Never use the product in a moving vehicle if doing so could distract the driver of the vehicle. Adequately secure the product in the vehicle to prevent injuries or other damage in the event of an accident. Waste disposal/Environmental protection 1.
Instrucciones de seguridad elementales Además queda en la responsabilidad del usuario utilizar el producto en la forma debida. Este producto está destinado exclusivamente al uso en la industria y el laboratorio o, si ha sido expresamente autorizado, para aplicaciones de campo y de ninguna manera deberá ser utilizado de modo que alguna persona/cosa pueda sufrir daño.
Instrucciones de seguridad elementales Símbolo Significado Símbolo Significado Conexión a tierra El aparato está protegido en su totalidad por un aislamiento doble (reforzado) Conexión a masa Distintivo de la UE para baterías y acumuladores Más información en la sección "Eliminación/protección del medio ambiente", punto 1.
Instrucciones de seguridad elementales Estados operativos y posiciones de funcionamiento El producto solamente debe ser utilizado según lo indicado por el fabricante respecto a los estados operativos y posiciones de funcionamiento sin que se obstruya la ventilación. Si no se siguen las indicaciones del fabricante, pueden producirse choques eléctricos, incendios y/o lesiones graves con posible consecuencia de muerte.
Instrucciones de seguridad elementales integran productos sin interruptor en bastidores o instalaciones, se deberá colocar el interruptor en el nivel de la instalación. 5. No utilice nunca el producto si está dañado el cable de conexión a red. Compruebe regularmente el correcto estado de los cables de conexión a red. Asegúrese, mediante las medidas de protección y de instalación adecuadas, de que el cable de conexión a red no pueda ser dañado o de que nadie pueda ser dañado por él, p. ej.
Instrucciones de seguridad elementales 17. No utilice el producto en condiciones en las que pueda producirse o ya se hayan producido condensaciones sobre el producto o en el interior de éste, como p. ej. al desplazarlo de un lugar frío a otro caliente. La entrada de agua aumenta el riesgo de choque eléctrico. 18. Antes de la limpieza, desconecte por completo el producto de la alimentación de tensión (p. ej. red de alimentación o batería).
Instrucciones de seguridad elementales pueden causar perturbaciones radioeléctricas en entornos residenciales debido a posibles perturbaciones guiadas o radiadas. En este caso, se le podrá solicitar al operador que tome las medidas adecuadas para eliminar estas perturbaciones. Aparato de clase B: Aparato adecuado para su uso en entornos residenciales, así como en aquellos conectados directamente a una red de distribución de baja tensión que suministra corriente a edificios residenciales.
Instrucciones de seguridad elementales 8. En caso de devolver baterías de litio a las filiales de Rohde & Schwarz, debe cumplirse las normativas sobre los modos de transporte (IATA-DGR, código IMDG, ADR, RID). Transporte 1. El producto puede tener un peso elevado. Por eso es necesario desplazarlo o transportarlo con precaución y, si es necesario, usando un sistema de elevación adecuado (p. ej. una carretilla elevadora), a fin de evitar lesiones en la espalda u otros daños personales. 2.
Customer Support Technical support – where and when you need it For quick, expert help with any Rohde & Schwarz equipment, contact one of our Customer Support Centers. A team of highly qualified engineers provides telephone support and will work with you to find a solution to your query on any aspect of the operation, programming or applications of Rohde & Schwarz equipment.
R&S®FPC1000 1 Documentation Overview Documentation Overview This section provides an overview of the R&S FPC1000 user documentation. You can find it on the product page at: www.rohde-schwarz.com/manual/fpc1000 Getting started manual Introduces the R&S FPC1000 and describes how to set up and start working with the product. A printed version is included in the delivery. User manual The user manual contains the description of all instrument modes and functions.
R&S®FPC1000 Documentation Overview Basic safety instructions Contains safety instructions, operating conditions and further important information. The printed document is included in the delivery. Data sheet and brochure The data sheet contains the technical specifications of the R&S FPC1000. It also lists the options and their order numbers as well as optional accessories. The brochure provides an overview of the R&S FPC1000 and shows its specific characteristics.
R&S®FPC1000 2 Preparing for Use Preparing for Use The R&S FPC1000 is designated for use in industrial, administrative and laboratory environments. Use the R&S FPC1000 only for its designated purpose. Observe the safety and usage instructions documented in the operating manual, as well as the operating conditions and performance limits stated in the data sheet. Make sure to consider the following information before using the R&S FPC1000 for the first time.
R&S®FPC1000 Preparing for Use Risk of electrostatic discharge (ESD) Electrostatic discharge (ESD) can damage the electronic components of the instrument and the device under test (DUT). ESD is most likely to occur when you connect or disconnect a DUT or test fixture to the instrument's test ports. To prevent ESD, use a wrist strap and cord and connect yourself to the ground, or use a conductive floor mat and heel strap combination.
R&S®FPC1000 Preparing for Use Unpacking and Checking the Instrument 2.1 Unpacking and Checking the Instrument Unpack the R&S FPC1000 carefully and check the contents of the package. ● Check if all items listed on the delivery note, including the getting started manual, are included in the delivery. ● Check the R&S FPC1000 for any damage. If the contents are damaged, immediately contact the carrier who delivered the package. ● Keep the box and packing material.
R&S®FPC1000 Preparing for Use Placing or Mounting the Instrument 2.2 Placing or Mounting the Instrument The R&S FPC1000 is designed for use under laboratory conditions, either on a bench top or in a rack. Benchtop operation If the R&S FPC1000 is operated on a bench top, the surface should be flat. The instrument can be used in horizontal position, standing on its feet, or with the support feet on the bottom extended.
R&S®FPC1000 Preparing for Use Turning the R&S FPC1000 on and off 2.3 Connecting AC Power The AC power connector on the rear panel of the R&S FPC1000 allows you to connect it to the primary power supply. Included in the delivery of the R&S FPC1000 are several common power plug types. 1. Select the cable with the plug type you need and firmly connect it to the R&S FPC1000. 2. Connect the AC plug to the power outlet to supply the R&S FPC1000 with power.
R&S®FPC1000 Preparing for Use Turning the R&S FPC1000 on and off Turning off the R&S FPC1000 ► Turn off the main AC power switch on the rear panel of the R&S FPC1000 (position "O"). The instrument is no longer supplied with AC power. Changing the AC supply fuse Only fuses of the type 2A T IEC60127-2/V should be used. 1. Disconnect the power cable. 2. Open the flap covering the voltage selector using a small screwdriver (or similar). 3. Remove the cylinder labeled with the nominal voltages.
R&S®FPC1000 Instrument Tour Front Panel 3 Instrument Tour The R&S FPC1000 has various connectors on the front and rear panel. 3.1 Front Panel 1 2 3 4 5 6 Figure 3-1: Front panel of the R&S FPC1000 1 = USB ports (type A) 2 = Headphone jack 3 = Softkeys 4 = Function keys and alphanumeric keypad 5 = RF input 4 = Power switch Getting Started 1178.4124.
R&S®FPC1000 Instrument Tour Front Panel Instrument damage caused by cleaning agents Cleaning agents contain substances that may damage the instrument. For example, cleaning agents that contain a solvent may damage the front panel labeling, plastic parts, or the display. Never use cleaning agents such as solvents (thinners, acetone, etc), acids, bases, or other substances. The outside of the instrument can be cleaned sufficiently using a soft, lintfree dust cloth.
R&S®FPC1000 Instrument Tour Front Panel You can control the output voltage with the volume control integrated into the firmware. Refer to the user manual for details. If you connect headphones or external speakers, the R&S FPC1000 automatically turns off the internal speaker. Risk of hearing damage To protect your hearing, make sure that the volume setting is not too high before putting on the headphones. USB ports (type A) The two USB 2.
R&S®FPC1000 Instrument Tour Rear Panel 3.2 Rear Panel 1 2 3 4 Figure 3-2: Rear panel of the R&S FPC1000 1 = Trigger input / external reference 2 = LAN 3 = Power supply 4 = USB port (type B) Power supply The AC power supply and main power switch are located in a unit on the rear panel of the instrument. The main power switch has the following states. ● Position "1": The instrument is supplied with power. ● Position "0": The instrument is disconnected from the power supply.
R&S®FPC1000 Instrument Tour Rear Panel Alternatively, you can use the connector to connect a 10 MHz reference signal to synchronize the frequency with the external reference. Note that the reference signal must be stronger than 0 dBm. LAN The LAN interface allows you to connect the R&S FPC1000 to a local network for remote control, printouts or data transfer.
