User Manual

Remote Control
R&S
®
FPC
318User Manual 1178.4130.02 ─ 05
FORMat[:DATA]
TRACe[:DATA]?.............................................................................................................318
TRACe[:DATA]?
This command queries the trace data (measurement results in graphical result dis-
plays).
Return values:
<Result> The number of values depends on the number of measurement
points.
The unit depends on the measurement and the measurement
format.
Example: //Query measurement results
TRAC?
Usage: Query only
17.16.7
Marker
Commands to configure markers described elsewhere.
●
Marker state (on / off):
CALCulate<n>:MARKer<m>[:STATe]
CALCulate<n>:MARKer<m>:AOFF
●
Marker position:
CALCulate<n>:MARKer<m>:X
CALCulate<n>:MARKer<m>:Y?
●
Marker position: set to peak:
CALCulate<n>:MARKer<m>:MAXimum[:PEAK]
●
Marker position: set to next peak:
CALCulate<n>:MARKer<m>:MAXimum:NEXT
●
Marker position: set to minimum:
CALCulate<n>:MARKer<m>:MINimum[:PEAK]
Commands to configure delta markers described elsewhere.
●
Delta marker state (on / off):
CALCulate<n>:DELTamarker<m>[:STATe]
CALCulate<n>:DELTamarker<m>:AOFF
●
Delta marker position:
CALCulate<n>:DELTamarker<m>:X
●
CALCulate<n>:DELTamarker<m>:X:RELative
●
CALCulate<n>:DELTamarker<m>:Y?
●
Delta marker position: set to peak:
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK]
Remote Commands of the VNA Application