User Manual

Remote Control
R&S
®
FPC
311User Manual 1178.4130.02 ─ 05
Suffix:
<n>
.
irrelevant
Parameters:
<DisplayRange> <numeric value>
*RST: 100
Default unit: dB
Example: //Define display range for cable loss
MEAS:MODE LOSS
MEAS:FORM LOSS
DISP:LOSS:Y:SCAL 50
DISPlay<n>:MAGNitude:REFerence
<RefValue>
This command defines the reference value for the return loss measurement format.
Prerequisites for this command
●
Select reflection, transmission or DTF measurement (MEASurement<n>:MODE).
●
Select return loss format (MEASurement<n>:FORMat).
Suffix:
<n>
.
irrelevant
Parameters:
<RefValue> <numeric value>
*RST: 0
Default unit: dB or %
Example: //Define reference value for return loss
MEAS:MODE REFL
MEAS:FORM MAGN
DISP:MAGN:REF 50
DISPlay<n>:MAGNitude:REFerence:POSition <RefPosition>
This command defines the position of the reference value for the return loss measure-
ment format.
Each step shifts the reference position one grid line up or down.
Prerequisites for this command
●
Select reflection, transmission or DTF measurement (MEASurement<n>:MODE).
●
Select return loss format (MEASurement<n>:FORMat).
Suffix:
<n>
.
irrelevant
Parameters:
<RefPosition> <numeric value> (integer only)
*RST: 8
Remote Commands of the VNA Application