Manualshelf

User Manual

ManualsBrandsRohde & Schwarz ManualsSignal Generators & Spectrum AnalysersFULLY LOADED Spectrum Analyser Bundle, 1GHz, 50Ohm
311312313314315316317318319320
Remote Control
R&S
®
FPC
309User Manual 1178.4130.02 ─ 05
Parameters:
<State> ON | OFF | 1 | 0
*RST: OFF
Example: //Activate DTF list
MEAS:MODE DTF
CALC:TRAN:DTF:PEAK ON
CALCulate<n>:TRANsform:DTFault:PEAK:THReshold <Threshold>
This command defines a threshold for the DTF list. Only peaks above that threshold
will appear in the DTF list.
Prerequisites for this command
●
Select the DTF measurement (MEASurement<n>:MODE).
Suffix:
<n>
.
irrelevant
Parameters:
<Threshold> <numeric value>
The unit depends on the measurement format (dB for return
loss, no unit for SWR).
*RST: 0
Example: //Define threshold for DTF list
MEAS:MODE DTF
CALC:TRAN:DTF:PEAK:THR -10
17.16.2 Amplitude
Commands to configure amplitude described elsewhere.
●
Auto Range:
DISPlay<n>[:WINDow]:TRACe<t>:Y[:SCALe]:ADJust
DISPlay<n>:LOSS:REFerence........................................................................................ 310
DISPlay<n>:LOSS:REFerence:POSition.......................................................................... 310
DISPlay<n>:LOSS:Y:SCALe........................................................................................... 310
DISPlay<n>:MAGNitude:REFerence................................................................................ 311
DISPlay<n>:MAGNitude:REFerence:POSition...................................................................311
DISPlay<n>:MAGNitude:Y:SCALe................................................................................... 312
DISPlay<n>:MAGNitude:Y:SPACing.................................................................................312
DISPlay<n>:PHASe:REFerence...................................................................................... 313
DISPlay<n>:PHASe:REFerence:POSition........................................................................ 313
DISPlay<n>:PHASe:UNWRap.........................................................................................313
DISPlay<n>:PHASe:Y:SCALe......................................................................................... 314
DISPlay<n>:VSWR:Y:SCALe.......................................................................................... 314
DISPlay<n>:VSWR:Y:SCALe:MAXimum.......................................................................... 315
DISPlay<n>:VSWR:Y:SCALe:MINimum............................................................................315
Remote Commands of the VNA Application