User Manual

Remote Control
R&S
®
FPC
306User Manual 1178.4130.02 ─ 05
Example: //Select measurement
MEAS:MODE LOSS
MEASurement<n>:FORMat <Format>
This command select the measurement format,
Suffix:
<n>
.
irrelevant
Parameters:
<Format> LOSS
Selects the cable loss format.
Available for cable loss measurements.
MAGNitude
Selects the return loss format.
Available for reflection and DTF measurements.
PHASe
Select the phase format.
Available for reflection measurements.
SMITh
Select the Smith chart format.
Available for reflection measurements.
VSWR
Selects the SWR format.
Available for reflection and DTF measurements.
Example:
//Select measurement format
MEAS:MODE REFL
MEAS:FORM VSWR
17.16.1.2 DTF Configuration
CALCulate<n>:DTF:CABLe:PRESet................................................................................ 306
CALCulate<n>:DTF:DISTance:STARt...............................................................................307
CALCulate<n>:DTF:DISTance:STOP............................................................................... 307
CALCulate<n>:TRANsform:DTFault:PEAK:COUNt?.......................................................... 308
CALCulate<n>:TRANsform:DTFault:PEAK:DATA<peak>?..................................................308
CALCulate<n>:TRANsform:DTFault:PEAK[:STATe]........................................................... 308
CALCulate<n>:TRANsform:DTFault:PEAK:THReshold...................................................... 309
CALCulate<n>:DTF:CABLe:PRESet <CableModel>
This command selects a cable model.
Prerequisites for this command
●
Select the DTF measurement (MEASurement<n>:MODE).
Suffix:
<n>
.
irrelevant
Remote Commands of the VNA Application