User Manual

Remote Control
R&S
®
FPC
304User Manual 1178.4130.02 ─ 05
TRIGger[:SEQuence]:LEVel:IQPower <Level>
This command defines the trigger level of the I/Q power trigger.
Prerequisites for this command
●
Select I/Q power trigger (TRIGger[:SEQuence]:SOURce).
Parameters:
<Level> <numeric value>
*RST: -20
Default unit: dBm
Example: //Configure I/Q power trigger
TRIG:SOUR IQP
TRIG:LEV:IQP -10
TRIGger[:SEQuence]:SOURce
<TriggerSource>
This command selects the trigger source.
Parameters:
<TriggerSource> IMMediate
No trigger is applied.
EXTernal
Select an external trigger.
IQPower
Select the I/Q power trigger.
Define the trigger level with TRIGger[:SEQuence]:LEVel:
IQPower.
*RST: IMMediate
Example: //Select trigger source
TRIG:SOUR IMM
17.15.7 Marker
Commands to configure markers described elsewhere.
●
Marker state (on / off):
CALCulate<n>:MARKer<m>[:STATe]
CALCulate<n>:MARKer<m>:AOFF
●
Marker position:
CALCulate<n>:MARKer<m>:X
CALCulate<n>:MARKer<m>:Y?
Commands to configure delta markers described elsewhere.
●
Delta marker state (on / off):
CALCulate<n>:DELTamarker<m>[:STATe]
Remote Commands of the Digital Demodulation