User Manual

Remote Control
R&S
®
FPC
288User Manual 1178.4130.02 ─ 05
Example: //Query modulation frequency
CALC:MARK:FUNC:ADEM:AFR?
Usage: Query only
CALCulate<n>:MARKer:FUNCtion:ADEMod:AM[:RESult]? <MeasType>
This command queries the modulation characteristics of an AM signal.
Prerequisites for this command
●
Measure an AM signal (CALCulate<n>:FEED).
Suffix:
<n>
.
irrelevant
Query parameters:
<MeasType> MIDDle
Queries the average modulation index.
MPEak
Queries the minimum modulation index.
PPEak
Queries the maximum modulation index.
RMS
Queries the RMS value of the modulation index.
Return values:
<Result> <numeric value>
Default unit: PCT
Example: //Query average modulation index
CALC:FEED 'XTIM:AMS'
CALC:MARK:FUNC:ADEM:AM? MIDD
Usage: Query only
CALCulate<n>:MARKer:FUNCtion:ADEMod:CARRier[:RESult]?
This command queries the power of the signal carrier.
Suffix:
<n>
.
irrelevant
Return values:
<Power> <numeric value>
Default unit: dBm
Example: //Query carrier power
CALC:MARK:FUNC:ADEM:CARR?
Usage: Query only
Remote Commands of the Analog Demodulation