User Manual

Remote Control
R&S
®
FPC
286User Manual 1178.4130.02 ─ 05
CALCulate<n>:MARKer<m>:X:SLIMits<slim>[:STATe]
Commands to configure delta markers described elsewhere.
●
Delta marker state (on / off):
CALCulate<n>:DELTamarker<m>[:STATe]
CALCulate<n>:DELTamarker<m>:AOFF
●
Delta marker position:
CALCulate<n>:DELTamarker<m>:X
●
CALCulate<n>:DELTamarker<m>:X:RELative
●
CALCulate<n>:DELTamarker<m>:Y?
●
Delta marker position: set to peak:
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK]
●
Delta marker position: set to next peak:
CALCulate<n>:DELTamarker<m>:MAXimum:NEXT
●
Delta marker position: set to minimum:
CALCulate<n>:DELTamarker<m>:MINimum[:PEAK]
Commands to configure marker demodulation described elsewhere.
●
Demodulation state:
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation[:STATe]
●
Demodulation domain:
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:SELect
●
Demodulation time:
CALCulate<n>:MARKer<m>:FUNCtion:DEModulation:HOLD
CALCulate<n>:MARKer<m>:FUNCtion:FIXed...................................................................286
CALCulate<n>:MARKer<m>:FUNCtion:FIXed
This command synchronizes the bargraph frequency to one of the marker frequencies
in the frequency scan.
At the same, the command switches to the fixed frequency measurement.
Suffix:
<n>, <m>
.
irrelevant
Usage: Event
17.14 Remote Commands of the Analog Demodulation
● Measurements and Result Displays......................................................................287
● Frequency............................................................................................................. 291
● Amplitude.............................................................................................................. 291
Remote Commands of the Analog Demodulation