User Manual

Remote Control
R&S
®
FPC
284User Manual 1178.4130.02 ─ 05
17.13.7 Traces
Commands to configure traces described elsewhere.
●
Trace mode:
DISPlay<n>[:WINDow]:TRACe<t>:MODE
●
Memory trace:
DISPlay<n>[:WINDow]:TRACe<t>:MEMory[:STATe]
●
Data format of trace export:
FORMat[:DATA]
[SENSe:]DETector<t>[:FUNCtion].................................................................................... 284
DISPlay[:WINDow]:TRACe:STYLe...................................................................................284
TRACe[:DATA]?.............................................................................................................285
[SENSe:]DETector<t>[:FUNCtion] <Detector>
This command selects the detector.
Suffix:
<t>
.
irrelevant
Parameters:
<Detector> AVERage | POSitive | QPEak | RMS
*RST: POSitive
Example: //Select quasipeak detector
DET QPE
DISPlay[:WINDow]:TRACe:STYLe <Style>
This command selects the style of the trace display.
Prerequisites for this command
●
Select frequency scan ([SENSe:]FREQuency:MODE).
Parameters:
<TraceStyle> LINes
Shows the results in form of a line trace with interpolation
between the receiver frequencies.
POLYgon
Shows the results in form of vertical lines at each receiver fre-
quency.
*RST: POLYgon
Example: //Display a line trace
FREQ:MODE SCAN
DISP:TRAC:STYL LIN
Remote Commands of the Receiver Application