User Manual

Remote Control
R&S
®
FPC
278User Manual 1178.4130.02 ─ 05
Prerequisites for this command
●
Select a limit line or define a threshold limit with one of the following commands:
– CALCulate<n>:LIMit<k>:LOWer:SELect
– CALCulate<n>:LIMit<k>:LOWer:THReshold
– CALCulate<n>:LIMit<k>:UPPer:SELect
– CALCulate<n>:LIMit<k>:UPPer:THReshold
Suffix:
<n>
.
irrelevant
<k> Limit line
Return values:
<Unit> Level unit of the limit line.
Example: //Query the level unit of a limit line
CALC:LIM:UPP:THR -70
CALC:LIM:UNIT?
Usage: Query only
CALCulate<n>:LIMit<k>:UPPer:SELect <LimitLine>
This command selects the upper limit line.
You can either select a limit line that is already stored on the internal memory or create
a new one with CALCulate<n>:LIMit<k>:DEFine.
Suffix:
<n>
.
irrelevant
<k> Limit line
Setting parameters:
<LimitLine> String containing the file name of the upper limit line
Example: //Select the upper limit line.
FREQ:SPAN 0HZ
CALC:LIM:UPP:SEL 'GSM_Upper.rellim'
Usage: Setting only
CALCulate<n>:LIMit<k>:UPPer:THReshold <Level>
This command defines the level of an upper threshold limit line.
Suffix:
<n>
.
irrelevant
<k> Limit line
Remote Commands of the Spectrum Application