User Manual

Remote Control
R&S
®
FPC
276User Manual 1178.4130.02 ─ 05
<k> Limit line
Return values:
<Status> • 0 for PASS
• 1 for FAIL
Example: //Perform a measurement and query the result of the check for
limit line 1.
CALC:LIM:UPP:THR -70
INIT;*WAI
CALC:LIM1:FAIL?
Usage: Query only
CALCulate<n>:LIMit<k>:LOWer:SELect <LimitLine>
This command selects the lower limit line.
You can either select a limit line that is already stored on the internal memory or create
a new one with CALCulate<n>:LIMit<k>:DEFine.
Suffix:
<n>
.
irrelevant
<k> Limit line
Setting parameters:
<LimitLine> String containing the file name of the lower limit line.
Example: //Select the lower limit line
FREQ:SPAN 0HZ
CALC:LIM:LOW:SEL 'GSM_Lower.rellim'
Usage: Setting only
CALCulate<n>:LIMit<k>:LOWer:THReshold <Level>
This command defines the level of a lower threshold limit line.
Suffix:
<n>
.
irrelevant
<k> Limit line
Parameters:
<Level> <numeric value>
Unit depends on the unit you have currently selected for the ver-
tical axis.
Example: //Turn on threshold limit line
CALC:LIM:LOW:THR -40DBM
CALCulate<n>:LIMit<k>:STATe <State>
This command turns a limit check on and off.
Remote Commands of the Spectrum Application