User Manual

Remote Control
R&S
®
FPC
263User Manual 1178.4130.02 ─ 05
<m> Marker
Example: //Match the reference level to the level of marker 1
CALC:MARK1:FUNC:REF
Usage: Event
CALCulate<n>:MARKer<m>:MAXimum:NEXT
This command moves a marker to the next higher trace maximum.
If the marker is not active yet, the command also turns on that marker.
Suffix:
<n>
.
irrelevant
<m> Marker
Example: //Move marker 2 to the next higher value
CALC:MARK2:MAX:NEXT
Usage: Event
CALCulate<n>:MARKer<m>:MAXimum[:PEAK]
This command positions a marker on the current trace maximum.
If the marker is not active yet, the command also turns on that marker.
Suffix:
<n>
.
irrelevant
<m> Marker
Example: //Move marker 2 to the maximum peak
CALC:MARK2:MAX
Usage: Event
CALCulate<n>:MARKer<m>:MINimum[:PEAK]
This command positions a marker on the current trace minimum.
If the marker is not active yet, the command also turns on that marker.
Suffix:
<n>
.
irrelevant
<m> Marker
Example: //Move marker 2 to the trace minimum
CALC:MARK2:MIN
Usage: Event
Remote Commands of the Spectrum Application