User Manual

ManualsBrandsRohde & Schwarz ManualsSignal Generators & Spectrum AnalysersFULLY LOADED Spectrum Analyser Bundle, 1GHz, 50Ohm

261

262

263

264

265

266

267

268

269

270

Remote Control

R&S

FPC

258User Manual 1178.4130.02 ─ 05

Return values:

The R&S FPC returns 1183 values. Each value corresponds to

one pixel of a trace.

The unit depends on the measurement and the unit you have

set with UNIT<n>:POWer

Note: If you use the auto peak detector, the command reads out

positive peak values only.

Example: //Read out the data for trace 1.

TRAC:DATA? TRACE1

Usage: Query only

17.12.8

Marker

CALCulate<n>:DELTamarker<m>:AOFF...........................................................................258

CALCulate<n>:DELTamarker<m>:MAXimum:NEXT...........................................................259

CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK].........................................................259

CALCulate<n>:DELTamarker<m>:MINimum[:PEAK].......................................................... 259

CALCulate<n>:DELTamarker<m>[:STATe]........................................................................ 259

CALCulate<n>:DELTamarker<m>:X................................................................................. 260

CALCulate<n>:DELTamarker<m>:X:RELative................................................................... 260

CALCulate<n>:DELTamarker<m>:Y?............................................................................... 261

CALCulate<n>:MARKer<m>:AOFF..................................................................................262

CALCulate<n>:MARKer<m>:FREQuency:MODE.............................................................. 262

CALCulate<n>:MARKer<m>:FUNCtion:CENTer................................................................ 262

CALCulate<n>:MARKer<m>:FUNCtion:REFerence........................................................... 262

CALCulate<n>:MARKer<m>:MAXimum:NEXT.................................................................. 263

CALCulate<n>:MARKer<m>:MAXimum[:PEAK]................................................................ 263

CALCulate<n>:MARKer<m>:MINimum[:PEAK]................................................................. 263

CALCulate<n>:MARKer<m>[:STATe]............................................................................... 264

CALCulate<n>:MARKer<m>:X........................................................................................ 264

CALCulate<n>:MARKer<m>:X:SLIMits<slim>:LEFT.......................................................... 264

CALCulate<n>:MARKer<m>:X:SLIMits<slim>:RIGHt......................................................... 265

CALCulate<n>:MARKer<m>:X:SLIMits<slim>[:STATe]....................................................... 266

CALCulate<n>:MARKer<m>:Y?.......................................................................................266

CALCulate<n>:DELTamarker<m>:AOFF

This command turns off all active delta markers.

Suffix:

<n>

irrelevant

<m> irrelevant

Example: //Turn off all delta markers

CALC:DELT:AOFF

Usage: Event

Remote Commands of the Spectrum Application