User Manual

Remote Control
R&S
®
FPC
253User Manual 1178.4130.02 ─ 05
Parameters:
<TriggerSource> IMMediate
No trigger is applied.
EXTernal
Select an external trigger.
VIDeo
Select the video trigger.
The video trigger is only available if span = 0 ([SENSe:
]FREQuency:SPAN).
*RST: IMMediate
Example: //Select external trigger
TRIG:SOUR EXT
17.12.7 Traces
CALCulate<n>:MATH<t>:COPY:MEMory..........................................................................253
CALCulate<n>:MATH<t>[:EXPRession][:DEFine].............................................................. 254
CALCulate<n>:MATH<t>:STATe...................................................................................... 254
DISPlay<n>[:WINDow]:TRACe<t>:MEMory[:STATe].......................................................... 254
DISPlay<n>[:WINDow]:TRACe<t>:MODE.........................................................................255
DISPlay<n>[:WINDow]:TRACe<t>[:STATe]....................................................................... 255
FORMat[:DATA]............................................................................................................. 256
[SENSe:]DETector<t>[:FUNCtion].................................................................................... 256
[SENSe:]DETector<t>[:FUNCtion]:AUTO.......................................................................... 257
[SENSe:]SWEep:COUNt.................................................................................................257
TRACe<n>[:DATA]?....................................................................................................... 257
CALCulate<n>:MATH<t>:COPY:MEMory [<MemorySlot>]
This command copies a trace into the memory of the R&S FPC.
Prerequisites for this command
●
Turn on a trace with a trace mode other than "Blank" (DISPlay<n>[:WINDow]:
TRACe<t>:MODE).
Suffix:
<n>
.
irrelevant
<t> Trace
Setting parameters:
[<MemorySlot>] not supported
Example: //Copy the trace into the memory
DISP:TRAC2 ON
DISP:TRAC2:MODE AVER
CALC:MATH2:COPY:MEM
Usage: Setting only
Remote Commands of the Spectrum Application