User Manual

Remote Control
R&S
®
FPC
246User Manual 1178.4130.02 ─ 05
Parameters:
<PadType> RAM | RAZ | HZTE
HZTE
75 Ω FSH-Z38
RAM
75 Ω RAM
RAZ
75 Ω RAZ
Example: //Select 75 Ω input impedance and the R&S RAZ as the match-
ing pad.
INPut:IMP 75;PAD RAZ
[SENSe:]CORRection:TRANsducer<td>:SELect <TransducerFactor>
This command selects a transducer factor.
Suffix:
<td>
.
Transducer
Parameters:
<TransducerFactor> String containing the file name of the transducer factor. If the file
does not exist, the R&S FPC creates a new transducer factor.
Example: //Select primary transducer
CORR:TRAN1:SEL 'HE200A-20-200.pritrd'
//Select secondary transducer
CORR:TRAN2:SEL 'PreAmp.sectrd'
[SENSe:]CORRection:TRANsducer<td>:UNIT?
This command queries the unit of the current transducer factor.
Prerequisites for this command
●
Select a transducer ([SENSe:]CORRection:TRANsducer<td>:SELect).
Suffix:
<td>
.
Transducer
Return values:
<Unit>
Example: //Query the unit of the primary transducer
CORR:TRAN1:SEL 'HE200A-20-200.pritrd'
CORR:TRAN1:UNIT?
Usage: Query only
[SENSe:]CORRection:TRANsducer<td>[:STATe] <State>
This command turns a transducer factor on and off.
Remote Commands of the Spectrum Application