User Manual

Remote Control
R&S
®
FPC
233User Manual 1178.4130.02 ─ 05
Return values:
<Position> <numeric value>
Returns one value for every harmonic.
The first value is the absolute power of the first harmonic. The
level unit depends on the unit you have set with the UNIT<n>:
POWercommand. The other values are power levels relative to
the first harmonic. The unit for these is dB.
The total number of return values depends on the number of
harmonics you have set with CALCulate<n>:MARKer<m>:
FUNCtion:HARMonics:NHARmonics
Example: See CALCulate<n>:MARKer<m>:FUNCtion:HARMonics:
PRESet
Usage: Query only
CALCulate<n>:MARKer<m>:FUNCtion:HARMonics:NHARmonics <Harmonics>
This command defines the number of harmonics that are analyzed.
Prerequisites for this command
●
Turn on the harmonic distortion measurement (CALCulate<n>:MARKer<m>:
FUNCtion:HARMonics[:STATe] on page 234).
Suffix:
<n>, <m>
.
irrelevant
Parameters:
<Harmonics> <numeric value> (integer)
Range: 1 to 6
*RST: 2
Example: See CALCulate<n>:MARKer<m>:FUNCtion:HARMonics:
PRESet
CALCulate<n>:MARKer<m>:FUNCtion:HARMonics:PRESet
This command optimizes the settings for the harmonic distortion measurement.
Prerequisites for this command
●
Turn on the harmonic distortion measurement (CALCulate<n>:MARKer<m>:
FUNCtion:HARMonics[:STATe] on page 234).
Suffix:
<n>, <m>
.
irrelevant
Remote Commands of the Spectrum Application