User Manual

Remote Control
R&S
®
FPC
229User Manual 1178.4130.02 ─ 05
Prerequisites for this command
●
Select the channel power measurement (CALCulate<n>:MARKer<m>:
FUNCtion:POWer:SELect).
Suffix:
<n>, <m>
.
irrelevant
Parameters:
<State> ON | OFF | 1 | 0
*RST: OFF | 0
Example: //Display the measured channel power in a 1 Hz bandwidth
CALC:MARK:FUNC:POW:RES:PHZ ON
17.12.1.3
Third Order Intermodulation
The following remote commands are exclusive to the occupied bandwidth measure-
ment.
CALCulate<n>:MARKer<m>:FUNCtion:TOI:RESult?......................................................... 229
CALCulate<n>:MARKer<m>:FUNCtion:TOI:SEARchsignal................................................ 229
CALCulate<n>:MARKer<n>:FUNCtion:TOI[:STATe]........................................................... 230
CALCulate<n>:MARKer<m>:FUNCtion:TOI:RESult?
This command queries the result of the third order intermodulation measurement.
Prerequisites for this command
●
Turn on TOI measurement (CALCulate<n>:MARKer<n>:FUNCtion:TOI[:
STATe]).
Suffix:
<n>, <m>
.
irrelevant
Return values:
<TOI> <numeric value>
Default unit: dBm
Example: //Query TOI result
CALC:MARK:FUNC:TOI ON
CALC:MARK:FUNC:TOI:SEAR
CALC:MARK:FUNC:TOI:RES?
Usage: Query only
CALCulate<n>:MARKer<m>:FUNCtion:TOI:SEARchsignal <Once>
This command searches for signals to determine the TOI.
Prerequisites for this command
●
Turn on TOI measurement (CALCulate<n>:MARKer<n>:FUNCtion:TOI[:
STATe]).
Remote Commands of the Spectrum Application