User Manual

Remote Control
R&S
®
FPC
227User Manual 1178.4130.02 ─ 05
Parameters:
<Measurement> CPOWer
Selects the channel power measurement.
OBANdwidth | OBWidth
Selects the occupied bandwidth measurement (OBW).
TDMA
Selects the TDMA power measurement.
Example: //Select the channel power measurement
CALC:MARK:FUNC:POW:SEL CPOW
CALCulate<n>:MARKer<m>:FUNCtion:POWer[:STATe]
<State>
This command turns a power measurement on and off.
Suffix:
<n>, <m>
.
irrelevant
Parameters:
<State> ON | 1
Turns on the power measurement.
OFF | 0
Performs a basic spectrum measurement.
*RST: OFF | 0
Example: //Turn on OBW measurement
CALC:MARK:FUNC:POW:SEL OBW
CALC:MARK:FUNC:POW ON
//Return to basic spectrum measurement
CALC:MARK:FUNC:POW OFF
17.12.1.2 Channel Power
The following remote commands are exclusive to the channel power measurement.
CALCulate<n>:MARKer<m>:FUNCtion:CPOWer:BANDwidth.............................................227
CALCulate<n>:MARKer<m>:FUNCtion:CPOWer:MODE....................................................228
CALCulate<n>:MARKer<m>:FUNCtion:CPOWer:UNIT......................................................228
CALCulate<n>:MARKer<m>:FUNCtion:POWer:RESult:PHZ.............................................. 228
CALCulate<n>:MARKer<m>:FUNCtion:CPOWer:BANDwidth <Bandwidth>
This command defines the channel bandwidth for channel power measurements.
Prerequisites for this command
●
Select the channel power measurement (CALCulate<n>:MARKer<m>:
FUNCtion:POWer:SELect).
Suffix:
<n>, <m>
.
irrelevant
Remote Commands of the Spectrum Application