User Manual

Remote Control

R&S

FPC

208User Manual 1178.4130.02 ─ 05

Parameters:

<State> ON | OFF | 1 | 0

*RST: ON

Example: //Turn off display during remote operation

SYST:DISP:UPD OFF

17.7 Audio Settings

SYSTem:BEEPer:KEY:VOLume...................................................................................... 208

SYSTem:BEEPer:POVerload[:STATe]...............................................................................208

SYSTem:BEEPer:VOLume..............................................................................................208

SYSTem:BEEPer:KEY:VOLume <Volume>

This command defines the volume of the keyboard click sound.

Parameters:

Range: 0 to 1

*RST: 0.3 (30%)

Example: //Select the key click volume

SYST:BEEP:KEY:VOL 0.10

SYSTem:BEEPer:POVerload[:STATe] <State>

This command turns an alert on a power overload on and off.

You can define the volume of this sound with SYSTem:BEEPer:VOLume.

Parameters:

<State> ON | 1

An overload situation on one of the inputs produces a sound.

OFF | 0

An overload produces no sound.

*RST: OFF

Example: //Turn on audio output in case of overload

SYST:BEEP:POV ON

SYSTem:BEEPer:VOLume <Volume>

This command defines the volume of the system beeper.

Parameters:

Range: 0 to 1

*RST: 0.6 (60%)

Audio Settings