User Manual

Remote Control
R&S
®
FPC
207User Manual 1178.4130.02 ─ 05
Parameters:
<Hour> <numeric value> (integer)
Range: 0 to 23
*RST: 0
<Minutes> <numeric value> (integer)
Range: 0 to 59
*RST: 0
Example: //Shift the time one hour ahead
SYST:TZON 01,00
UNIT<n>:LENGth
<Unit>
This command selects the unit for distances.
Suffix:
<n>
.
irrelevant
Parameters:
<Unit> FEET
Length units in feet.
METers
Length units in meter.
*RST: METers
Example: //Select length unit
UNIT:LENG MET
17.6 Display Settings
DISPlay:BRIGhtness...................................................................................................... 207
SYSTem:DISPlay:UPDate[:STATe]...................................................................................207
DISPlay:BRIGhtness <Brightness>
This command defines the brightness of the display backlight.
Parameters:
<Brightness> <numeric value>
Range: 0 to 1
*RST: 1 (100 %)
Example: //Define display brightness
DISP:BRIG 0.80
SYSTem:DISPlay:UPDate[:STATe] <State>
This command turns the display during remote operation of the R&S FPC on and off.
Display Settings