User manual

51
Subject to change without notice
G e n e r a l i n s t r u m e n t s e t t i n g s
Fig. 8.2: Updating menu
Nowchoosewhichtoupdate:thermwareorthehelp function.
Ifbotharetobeupdateditisrecommendedtorstupdatethe
rmware.Afteryouselectedrmwareupdatingbypushingthe
appropriate key the respective date will be searched on the stick,
theinformationofthermwaretobeupdatedfromthestick
willbedisplayedbelowthelineNEW.Incasethenewrmware
should be identical to the existing one, the number of the version
will be shown in red, otherwise it will be shown in green; only
then should you activate the updating by pushing the soft key
EXECUTE. If you intend to update the help function or add a help
language choose HELP in the updating menu. The information
window will now display the languages installed, the date, and
the information about the languages available on the stick. With
the soft menu, languages may be added, removed or updated.
Please note the format of the date:YYYY-MM-DD according to
the multi language norm of ISO 8601.
Fig. 8.3: Info display of help update
8.7 Upgrade of software options
The HMS series may be upgraded with options which will be-
come accessible after inputting a licence key. At this time, the
optionHO3011isavailable(preamplier).
The licence key will be sent to you by email as an appended
datale(name:SERIALNUMBER.hlk).ThisleisanASCIIle
and may be opened with an editor, then the true key can be
read. There are two methods for employing the key to use the
desired option: the automatic or the manual input. The fastest
andsimplestmethodistheautomaticinput:rststorethele
on an USB memory stick, then install the stick into the front
panel FRONT USB port of your HMS and press the key „SETUP“
in the „General“ area of the HMS front panel. The „SETUP“ menu
will open. Select page 2 by pressing the respective softkey, the
following menu will open:
Fig. 8.4: UPGRADE menu
Now open the UPGRADE menu by pressing the respective soft-
key.Thenpressthesoftmenukeynextto„ReadLicencele“
which will open the data manager. Use the universal knob to
selectthecorrectleandthenpressthesoftkeynexttoLOAD.
This will load the licence key; the option will be ready to use
immediately after a fresh start of the instrument.
The alternative method is the manual input of the licence key.
Select the menu UPGRADE and press the soft menu key next
to „Manual key input“. This will open an input window, use the
universal knob and the ENTER-key to input the licence key.
Fig. 8.5: Manual licence key input
After inputting of the complete key please press the softkey next
to ACCEPT in order to input the key into the system. The option
will be activated after a fresh start of the instrument.