User manual

36
Subject to change without notice
C o n t r o l s a n d d i s p l a y
B
19
20 21 22
24 2423
C
D
25 26 27 28 29
2 Controls and display
Front panel
(HMS1010 differs in frequency range;
HMS3000 / HMS1000 without Tracking Generator)
1
Display (TFT)
6,5“ VGA TFT Display
2
Interaktive Softkeys (buttons)
Direct access of all relevant functions
3
POWER (button)
Power switch turns the instrument on/off
Area
A
:
This area includes the parameter settings.
4
AMPL (illuminated button)
Setting of amplitude parameters
5
SPAN (illuminated button)
Setting of the Span
6
FREQ (illuminated button)
Setting of the frequency
7
TRACE (illuminated button)
Congurationofdataaquisitionandanalysis
8
SWEEP (illuminated button)
Setting of the sweep time and the trigger source
9
BANDW (illuminated button)
Setting of the resolution and video bandwidth
10
LINES (illuminated button)
 Congurationofdisplayedandlimitlines
11
MEAS (illuminated button)
Implementation of extended measurements
12
DISPLAY (illuminated button)
Setting of the display
13
PEAK SEARCH (illuminated button)
Measuring value peak display
14
MARKER > (illuminated button)
Search function of marker
15
MARKER (illuminated button)
Selection and arrangement of the absolute and relative
marker
16
MODE (illuminated button)
Switching between SWEEP- and RECEIVER-Mode
17
PRESET (button)
Factory reset
18
AUTO TUNE (button)
Automatically setting of instrument settings
Area
B
(Data):
This area includes the possibility of setting parameters via
numerical keyboard and unit keys.
19
Numerical keyboard (buttons)
Set of all operating parameters
20
BACK (button)
Set back of inputs
21
CANCEL (button)
Terminate the editing mode
22
ENTER (button)
Conrmthevaluesviakeyboard
Area
C
(Variation):
This area includes the settings via
rotary knob and arrow buttons
23
Rotary knob
Knob to adjust and activate the
values or menu items by pushing
24
Arrow buttons s t (buttons)
Set of signal parameters
Area
D
(General):
This area includes the general intrument settings
25
FILE/PRINT (illuminated button)
The key FILE/PRINT on the front panel allows you to store
curves, screen shots, screen shots with settings
26
SETUP (illuminated button)
Display of general instrument settings
27
HELP (illuminated button)
Including display help
28
SAVE/RECALL (illuminated button)
Store and restore of instrument settings, references,
curves and screenshots