User manual

33
Subject to change without notice
H M S S e r i e s S p e c i f i c a t i o n s
HMS3000/3010E/121010 · C&E · Subject to change without notice · © HAMEG Instruments GmbH
®
· DQS-certified in accordance with DIN EN ISO 9001:2008, Reg.-No.: 071040 QM08
HAMEG Instruments GmbH · Industriestr. 6 · D-63533 Mainhausen · Tel [phone] · Fax [phone] · www.hameg.com · [e-mail]
1 GHz Spectrum Analyzer HMS1000, HMS1010 (with TG)
[3 GHz Spectrum Analyzer HMS3000, HMS3010 (with TG)]
All data valid at 23 °C after 30 minute warm-up
Frequency
Frequency range:
HMS1000, HMS1010
100 kHz…1 GHz
HMS3000, HMS3010
100 kHz…3 GHz
Temperature stability:
±2 ppm (0…30 °C)
Aging:
±1 ppm/year
Frequency counter (from SW 2.0):
Resolution
1 Hz
Accuracy
±(Frequency x tolerance of reference)
Span setting range:
HMS1000, HMS1010
0 Hz (zero span) and 1 kHz…1 GHz
HMS3000, HMS3010
0 Hz (zero span) and 100 Hz…3 GHz
Spectral purity, SSB phase noise:
30 kHz from carrier
(500 MHz, +20…30 °C)
<-85 dBc/Hz
100 kHz from carrier
(500M Hz, +20…30 °C)
<-100 dBc/Hz
1 MHz from carrier
(500MHz, +20…30 °C)
<-120 dBc/Hz
Sweep time:
Span = 0 Hz
20 ms…100 s
Span > 0 Hz
20 ms…1000 s, min. 20 ms/600 MHz
Resolution bandwidths (-3 dB):
HMS1000, HMS1010
1 kHz…1 MHz in 1–3
steps,
200 kHz
HMS3000, HMS3010
100 Hz…1 MHz in 1–3 steps, 200 kHz
Tolerance:
≤300kHz
±5 % typ.
1MHz
±10 % typ.
Resolution bandwidths (-6 dB):
HMS1000, HMS1010
9 kHz, 120 kHz, 1 MHz
HMS3000, HMS3010
200 Hz, 9 kHz, 120 kHz, 1 MHz
Video bandwidths:
10 Hz…1 MHz in 1–3 steps
Amplitude
Display range:
Average noise level displayed up to +20 dBm
Amplitude measurement
range:
Typ. -114…+20 dBm
Max. permissible DC
at HF input:
80 V
Max. power at HF input:
20 dBm, 30 dBm
for max. 3 Min.
Intermodulation free range:
TOI products, 2x -20 dBm
(-10 dBm ref. level)
66 dB typ. (typ. +13 dBm third-order
intercept)
(at distance between
signals ≤2 MHz) 60 dB typ. (+10 dBm TOI)
(at distance between
signals >2 MHz) 66 dB typ. (typ. +13 dBm TOI)
DANL (Displayed average noise level):
(RBW 1 kHz, VBW 10 Hz,
ref. level ≤-30 dBm
10 MHz…1 GHz resp. 3 GHz) -105 dBm, typ. -114 dBm
With Preamp. HMS1000/HMS1010: -125 dBm typ. (1 kHz RBW)
HMS3000/HMS3010: -135 dBm typ. (100 Hz RBW)
Inherent spurious:
(ref. level ≤-20 dBm,
f >30 MHz, RBW ≤100 kHz)
<-80 dBm
Input related spurious:
(Mixer level ≤-40 dBm,
carrier offset >1 MHz) -70 dBc typ., -55 dBc (2…3 GHz)
2
nd
harmonic receive frequency
(mixer level -40 dBm): -60 dBc typ.
Level display:
Reference level
-80…+20 dBm in 1 dB steps
Display range
100 dB, 50 dB, 20 dB, 10 dB, linear
Logarithmic display scaling
dBm, dBµV,
dBmV
Linear
display scaling
Percentage of reference level (from SW 2.0)
Measured curves:
1 curve and 1 memory curve
Trace mathematics:
A-B (curve-stored curve), B-A
Detectors:
Auto-, Min-, Max-Peak, Sample, RMS,
Average, Quasi-Peak
Failure of level display:
<1.5 dB, typ. 0.5 dB
(ref. level to ref. level-50 dB, 20…30 °C)
Marker/Deltamarker
Number of marker:
8
Marker functions:
Peak, next peak, minimum, center
= marker, frequency, reference level
= marker level, all marker on peak
Marker displays:
Normal (level, lin. & log.), delta marker, noise
marker, (frequency) counter (from SW 2.0)
Inputs/Outputs
HF Input
N socket
Input Impedance:
50 Ω
VSWR
(10 MHz…1 GHz/3 GHz):
<1.5 typ.
Output tracking generator:
(HMS1010/HMS3010)
N socket
Output Impedance:
50 Ω
Frequency range:
5 MHz…1 GHz [3 GHz]
Output level:
-20…0 dBm, in 1 dB steps
Trigger and external
reference input:
BNC female, selectable
Trigger voltage
TTL
Reference frequency
10 MHz
Essential level (50 Ω)
10 dBm
Supply output for field probes:
6 V
dc
, max. 100 mA (2.5 mm DIN jack)
Audio output (Phone):
3.5 mm DIN jack
Demodulation
AM and FM (internal speaker)
Miscellaneous
Display:
16.5 cm (6.5“) TFT
Color
VGA Display
Save/Recall memory:
10 complete device settings
Trigger:
Free run, Video Trigger (from SW 2.0),
Single Trigger, external Trigger
Interfaces:
Dual-Interface USB/RS-232 (HO720),
USB-Stick (frontside), USB-Printer
(rear side), DVI-D for ext. monitor
Power supply:
105…253 V, 50/60 Hz, CAT II
Power consumption:
Max. 40 Watt at 230 V, 50 Hz
Protection class:
Safety class I (EN61010-1)
Operating temperature:
+5…+40 °C
Storage temperature:
-20…+70 °C
Rel. humidity:
5…80 % (non condensing)
Dimensions (W x H x D):
285 x 175 x 220 mm
Weight:
3.6 kg
Accessories supplied: Line cord, Operating manual, CD, HZ21 Adapter plug, N
plug to BNC socket (2x HMS1010/3010)
Recommended accessories:
HO730 Dual-Interface Ethernet/USB
HO740 Interface IEEE-488 (GPIB), galvanically isolated
HO3011 Preamplifier -135 dBm DANL (100 Hz RBW)
HZ13 Interface cable (USB) 1.8 m
HZ14 Interface cable (serial) 1:1
HZ20 Adapter, BNC to 4 mm banana
HZ33 Test cable 50 Ω, BNC/BNC, 0.5 m
HZ34 Test cable 50 Ω, BNC/BNC, 1 m
HZ46 4RU 19‘‘ Rackmount Kit
HZ72 GPIB-Cable 2 m
HZ99 Carrying Case for protection and transport
HZ520 Plug-in Antenna with BNC connection
HZ525 50 Ω-Termination, N plug
HZ530 Near-Field Probe Set 1 GHz for EMV diagnostics
HZ540/550 Near-Field Probe Set 3 GHz for EMV diagnostics
HZ540L/550L Near-Field Probe Set 3 GHz for EMV diagnostics
HZ547 3 GHz VSWR Bridge for HMS1010, HMS3010
HZ560 Transient limiter
HZ575 75/50 Ω Converter
HZO30 active probe 1 GHz (0.9 pF, 1 MΩ, including many accessories)