HMS-X_bro_de-en_3607-0181-3X_v0200.indd 1 Product Brochure | 02.00 Test & Measurement Spectrum Analyzer 1.6 GHz | 3 GHz R&S®HMS-X 15.03.
1 Basic Unit + 3 Options Key facts ❙❙ Frequency range: 100 kHz to 1.6 GHz/3 GHz*1 ❙❙ Spectral purity greater than -100 dBc/Hz (at 100 kHz) ❙❙ SWEEP from 20 ms to 1000 s ❙❙ Detectors: auto-, min-/max.-peak, sample, RMS, average, quasi-peak*2 ❙❙ Miscellaneous marker/Δmarker and peak functions ❙❙ Tracking generator*3 Frequency range: 5 MHz to 1.
Your R&S®HMS-X Spectrum Analyzer You can create your R&S®HMS spectrum analyzer by combining a basic unit with any of three available options. In case of growing requirements, upgrade vouchers allow you to upgrade your instruments with all options at any point in time. 3 GHz R&S®HMS-EMC ❙ This option activates all the functions that are required for EMC precompliance measurements. The preamplifier option has been integrated into the new R&S®HMS-EMC option.
EMC Precompliance Not only do unexpected results in test labs during EMC compliance measurements translate into extra costs, quite often they also cause a substantial delay for your project. Rohde & Schwarz offers effective and costefficient tools for EMC precompliance measurements which allow you to successfully prevent possible surprises before the actual onset of a problem. Our HMExplorer software for your EMC measurements is included with every HMS-X spectrum analyzer with activated EMC option.
Recommended Accessories 3 GHz VSWR bridge HZ547 Near-field probe set 3 GHz HZ540 This unit is used to measure the voltage standing wave ratio (VSWR) and reflection coefficient of a device under test with an impedance of 50 Ω. Typical test devices include attenuators, terminations, frequency switches, amplifiers, cables and mixers.
Upgrade at any time You can easily upgrade all three available options at any later point in time with option upgrade vouchers available at your dealer. The voucher number and the serial number of your R&S®HMS-X instrument enable you to generate the respective licence key directly on our web page http://voucher.rohde-schwarz.com.
R&S®HMS-X Spectrum analyzer – Specifications (from firmware version 2.250, all specifications at 23°C after 30 minutes warm-up) Frequency Frequency range DANL (displayed average noise level) (ref. level ≤-30 dBm, frequency range 10 MHz to 3 GHz) Tracking generator output Connector N socket Output impedance 50 Ω basic unit 100 kHz to 1,6 GHz 10 kHz (RBW), 1 kHz (VBW) -95 dBm (typ.
© 2015 Rohde & Schwarz GmbH & Co. KG Mühldorfstr. 15, 81671 München, Germany Phone: +49 89 41 29 - 0 Fax: +49 89 41 29 12 164 E-mail: info@rohde-schwarz.com Internet: www.rohde-schwarz.com Subject to change – Data without tolerance limits is not binding. R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG. Trade names are trademarks of the owners. 3/16 HMS-X_bro_de-en_3607-0181-3X_v0200.indd 8 PD 3607.0181.32 V 02.00 PDP1 en 3607018132 15.03.
