User manual
Subject to change without notice
S p e c i f i c t i o n s
H-Field-Probe Frequency response(typical)
SCALE = 10dB/DIV.
SCALE = 10dB/DIV.
High Impedance Probe
Frequency response(typical)
SCALE = 10dB/DIV.
E-Field-Probe Frequency response(typical)
SPAN: 3 GHz
RESBW: 30 kHz VIDBW: 100 kHz
SPAN: 3 GHz
RESBW: 30 kHz VIDBW: 100 kHz
SPAN: 3 GHz
RESBW: 30 kHz VIDBW: 100 kHz
Frequency range: 1 MHz to approx. GHz
Directional sensitivity: Omnidirectional
Sensitive to electrical elds
Output impedance: 50
W; SMA-connector
Power supply: 6 V / 80 mA
Frequency range:
<
0 MHz to approx. GHz
Directional sensitivity: like frame antenna, Sensitive to
changing magnetic elds
Output impedance: 50
W; SMA-connector
Frequency range: 1 MHz to approx. GHz
Attenuation: in the range of approx. 10:1 up to
0:1
Input impedance:
<
pF // 50 KW
Max. input voltage: 10 Vpp
Max. voltage of a
non-insulated
conductor: 0 V
Output impedance: 50
W; SMA-connector
Power supply: 6 V / 80 mA
Frequency range:
<
50 MHz to approx. GHz
Directional sensitivity: like frame antenna, Sensitive to
changing magnetic elds, High
spatial resolution due to
very small sensor area
Max. voltage of a
non-insulated
conductor: 0 V
Output impedance: 50
W; SMA-connector
Power supply: 6 V / 50 mA
Frequency range: 0.5 MHz to approx. GHz
Attenuation: 10:1
Input impedance:
<
0.pF // 50 KW
Max. input voltage: 5 Vpp
Max. voltage of a
non-insulated
conductor: 0 V
Output impedance: 50
W; SMA-connector
Power supply: 6 V / 80 mA
Frequency range:
<
0 MHz to approx. GHz
Directional sensitivity: like frame antenna
Sensitive to changing magnetic
elds, Radiation of changing
magnetic elds
Output impedance: 50
W; SMA-connector
Power supply: not required; passive probe
Max. input power: 0,5 W (short term)
Valid at 23 °C after a 30 minutes warm-up period
Physical dimensions (H x W x L): 1 x 7 x 70 mm (+ antenna
at HZ551)
Power supply from HAMEG Series 5000 Spectrum analyzers
Package content:
HZ50 (Basic set): 1x HZ551; 1x HZ55; 1x HZ55;
1x SMA/N-Cabel 1,m; Carrying
case; Manual
HZ550 as basic set HZ50 + 1x HZ55 +
1x HZ556 + second SMA/N-cable