User manual

9
Introduction
priate soft menu key. Once the last page was listed, the
displaywillloopbacktothetherstpage.
2.5 Basic Settings and Integrated Help
You can access important basic settings such as language
for user interface and help, general settings and interface
settings in the menu that opens when you press the SE-
TUPkeyintheGENERALsection.Ontherstpageofthe
menu for the basic settings you can select the language
for user interface and help. The menu item INTERFACE
activatesthemenustoperformtheinterfaceconguration
(USB or Ethernet). The menu item PRINTER includes set-
tings for POSTSCRIPT and PCL compatible printers. When
pushing this soft menu key, a submenu opens allowing the
user to select the paper format and color mode. Using the
assigned soft menu key, the top menu item PAPER FOR-
MAT allows you to choose from A4, A5, B5, B6, Executive,
Letter and Legal in either portrait or landscape format. Use
the universal knob in the CURSOR/MENU section to select
the appropriate format. Following the same setup proce-
dure, the menu item COLOR MODE allows you to choose
between Grayscale, Color and Inverted. The Grayscale
mode converts the color image to a grayscale image which
can be printed on a black-and-white postscript printer.
The Color mode prints the image in color as shown on the
screen (black background). The INVERTED mode prints the
color image with a white background on a color printer thus
saving toner and ink.
The menu item DEVICE INFORMATION opens a window
with detailed information on hardware and software of the
measuring instrument. The soft menu key DEVICE NAME
allowsyoutodeneanamewithupto19characterswhich
will be listed when screenshots are printed. The soft menu
MENU allows you to select whether soft menus are to be
closed manually or automatically after 4-30s. Use the soft
menu key LOGO IN SCREENSHOT to determine whether
the R&S logo displays on the top right corner of printouts or
not.
The soft menu UPDATE for the instrument and help update
and LICENCES to upgrade software options will be descri-
bed in detail in the following chapters. The soft menu DATE
& TIME is used to set the date and time. The soft menu
SOUND is used to set the sound options. You can activate a
sound as beeping during setup, in the event of an error and
for the triggers.
The integrated help can be activated by pushing the HELP
key in the GENERAL section. This opens a window with
explanatory text. The text in the help window is dynami-
cally updated with descriptions of the corresponding
setting or function. If you no longer require help, push the
HELP key to close the HELP option. This will turn the LED
indicator for the key off and the text window for the help
will close.
2.6 Updates to Instrument Firmware, Language
and Help
The R&S®HMO1002 is constantly being advanced. You
candownloadthecurrentrmwareatwww.hameg.com.
Firmwareandhelp(ifavailable)arepackedinoneZIPle.
Depending on the required extent of the update, the ZIP
lemightincludeeitherallupdatesorsimplytheinstru-
mentrmware,forinstance.AfterdownloadingtheZIP
le,unpackthedatatothebasedirectoryofaUSB stick.
Then connect the USB stick with the USB port of the oscil-
loscope and press the SETUP key in the GENERAL section
of the control panel. The menu item UPDATE can be found
on page 2|2. Selecting this menu item opens a window
displaying version number, date and build information of
thecurrentlyinstalledrmware.Instrumentrmwareor
help can be updated at this point.
Pressing the soft menu key UPDATEtheinstrumentrm-
warewillresultinasearchforthecorrespondingleon
the USBstick.Theinformationforthenewrmwaretobe
installed will then be displayed on the stick below the row
labeled NEW:. The version number will be displayed in red
incasetheexistingrmwareontheinstrumentisidentical
to the latest version; otherwise the version number will
be shown in green. Only if this is the case, press the soft
menu EXECUTE to start the update. Choose the HELP
menu item in the Update menu if you intend to update the
help or add a new language for help.
The information window will now display all installed
languages, the date and relevant information about the
languages available on the stick. The soft menu allows you
to add, remove or update languages. Please note the date
format (YYYY-MM-DD) in compliance with multilingual
help ISO 8601 standards.
2.7 Options / Voucher
The R&S®HMO1002 includes options which allow you to
expand the range of application for the instrument (such as
bandwidth upgrade or bus analysis functions). At this time,
options HOO10/HOO11/HOO12 and HOO512/HOO712/
HOO572 are available. The bandwidth options HOO572,
HOO512 and HOO712 and the bus analysis functions
HOO10, HOO11 and HOO12 can be purchased ex factory
with a R&S®HMO1002. The bandwidth upgrade vouchers
HV572, HV512 and HV712 and the bus analysis upgrade
vouchers HV110, HV111 and HV112 allow for an upgrade at
a later date via licence key. The installed options and
voucherscanbeveriedunderDeviceInformationinthe
SETUP menu.
Once you have entered the voucher code on the
homepage http://voucher.hameg.com, the licence key will
begenerated(„SERIALNUMBER.hlk“).TheASCIIlemay
be opened with an editor. This allows you to read the
Only 4 languages can be installed on the HMO. If four language
places are assigned and you wish to install another one, you rst
need to delete one language.