Product Brochure | 01.
Bandwidth Sampling Rate Memory Depth FFT 50 MHz, 70 MHz or 100 MHz 1 Gsample, 512 Msample per channel 1 Msample, 512 Ksample per channel The easy way to analyze the signal spectrum QuickView Key results at the push of a button Auto Measurement Versatile measurement functions and fast results Voltmeter Voltmeter measurements on both analog channel simultaneously Acquire High acquisition rate to identify signal faults Channels High vertical sensitivity down to 1 mV/div Serial Bus Analysis Functi
At a glance High sensitivity, multifunctionality and a great price – that is what makes the R&S®HMO1002 digital oscilloscope so special. From embedded developers to service technicians to educators – with its wide range of functions, the R&S®HMO1002 addresses a broad group of users. Advanced, powerful technology in a fanless design meets the high requirements of today‘s customers.
Key facts Superior hardware-based acquisition for precise measurement results ❙❙ 1 Gsample/s sampling rate, 1 Msample memory depth ❙❙ High vertical sensitivity down to 1 mV/div ❙❙ Low-noise measurement due to state-of-the-art A/D converter ❙❙ High acquisition rate to identify signal faults Versatile measurement functions and fast results ❙❙ Wide selection of automatic measurement functions ❙❙ QuickView: key results at the push of a button ❙❙ Mask test: a new mask can be easily created with just a few keystr
0 MHz, 70 MHz or 100 MHz 50MHz 70MHz 100MHz HV512 Depending on your requirements, the standard R&S®HMO1002 bandwidth can be upgraded from 50 MHz to 70 MHz or 100 MHz. This is done with upgrade vouchers which can be purchased at the dealer either together with the instrument or anytime thereafter. ❙❙ The upgrade voucher HV572 allows the basic 50 MHz instrument to be upgraded to a bandwidth of 70 MHz. ❙❙ Voucher HV512 increases the bandwidth from 50 MHz to 100 MHz.
Always a MSO Optional: Logic probe R&S®HO3508 Although it is unusual for this instrument class, the standard R&S®HMO1002 model is equipped with a mixed signal functionality with no software option necessary to unlock it. Analog and digital signals can be measured and analyzed simultaneously. A real life example is the integration of ADCs (analog digital converter) or DACs (digital analog converter).
Serial Bus Analysis I2C, SPI, CAN or LIN – in terms of interaction with the outside world for embedded systems, it is safe to say that these are the most commonly used communication protocols. The R&S®HMO1002 oscilloscopes offer you hardwareaccelerated signal triggering and decoding for all of these protocols.
Functions for everyday use Pattern Generator Are you working on a distributed project, the interface definition has been completed but the prototype hardware has yet to be implemented? The R&S®HMO1002 pattern generator includes a tool for freely programmable 4-bit wide bus signals which allows you to emulate a sensor signal, for instance, to continue your work.
Function Generator Digital Voltmeter (DVM) Component Tester Select the signal type suitable for your scope of application. The various basic types with frequencies of up to 50 kHz not only assist trainees and students with their measuring tasks, they also support technicians in the audio field with their assessments of filters and passes. The three-digit digital voltmeter is also a standard feature which makes the work of service technicians in particular easier.
Frequency Analysis Due to the outstanding FFT functionality of the R&S®HMO series oscilloscopes signals can also be analysed in the frequency domain with up to 128 Kpoints. Additional practical tools such as cursor measurement as well as peak-detect-functions are also available. They allow engineers to complete their analysis significantly faster, also in the frequency domain.
Figure 4: Rectangular measurement window between various measurement windows like the „rectangular“ type that has been used in figure 4. Although this window type captures frequencies at a high degree of accuracy, it is also accompanied by more noise. In order to suppress this disturbing interference users can for instance choose the Hanning window. The impact on the spectrum is visible in figure 5 (see device screen).
R&S®HMO1002 50/70/100MHz 2-channel mixed signal oscilloscopes Firmware: ≥ 5.0 All data valid at 23°C after 30 minute warm-up. Max. input voltage: 200 Vp (derates at 20 db/decade to 5 V above 100 kHz) Position range: ±5 Div (from center of screen) Trigger hold-off: Channel isolation: 35 dB from DC to specified bandwidth (same V/Div range) External trigger input (BNC) Display Noise rejection: min. level: 1.
Video Memory Zoom: Sync. pulse polarity: positive, negative supported standards: NTSC, SECAM, PAL, PAL-M, SDTV 576i, HDTV 720p, HDTV 1080i, HDTV 1080p up to 50.000 : 1 Cursor measurements: Time base Accuracy: 50.0 x 10-6 Aging: 10.
Scale: dBm, dBV, Vrms Waveform arithmetics: refresh, envelope, average (up to 512) Cursor measurement: 2 horizontal cursors, previous/next peak search Sources: all analog channels Pattern Generator square wave / probe adjust, bus signal source, counter, programmable pattern Square wave (Probe ADJ output): frequency range: 1mHz to 500kHz level: 2.
Recommended Accessories HZO50 HZO51 HZO20 HZO30 HZ115 AC/DC Current Probe 30 A, DC to 100kHz AC/DC Current Probe 100/1000 A, DC to 20kHz High voltage probe 1000:1 (400 MHz, 1000 Vrms) 1 GHz active probe (0.9 pF, 1 MΩ) Differential Probe 100:1/1000:1 HO3508 HZO40 HZO41 8 channel logic probe (350 MHZ, 4pF) Active differential probe 200 MHz (10:1, 3.
value-instruments.com HAMEG Instruments GmbH Industriestr. 6 | 63533 Mainhausen | Germany | Phone +49 (0) 6182 8000 R&S® is a registered trademark of Rohde & Schwarz GmbH & Co. KG HAMEG Instruments® is a registered trademark of HAMEG Instruments GmbH Trade names are trademarks of the owners PD 3607.0152.32 | Version 01.00 | 05 / 2014 | © HAMEG Instruments GmbH Data without tolerance limits is not binding | Subject to change 3607015232 PD 3607.0152.32 V 01.00 PDP1 en www.hameg.
