User manual

16
Quick Start Guide
that Storage Front is selected. Press the soft menu key to
open the menu where you can select these settings. It is im-
portant to connect a USB stick with the front USB connec-
tor of your oscilloscope which must be recognized by your
instrument. Pressing the soft menu key SAVE allows you to
save a screenshotusingthedefaultlename(thecurrent
lenameisdisplayedinthemenuitemFILENAME).You
canalsoselectanameforthetargetlewithupto8charac-
ters. Select the menu item FILE NAME and use the universal
knob to enter the name (in this example “TRC”).
Fig. 3.14: Menu Screenshots
Press the soft menu key ACCEPT. The oscilloscope accepts
the name and returns to the settings menu. Here you can
store the current image by pressing the soft menu key SAVE.
Alternatively, you can move up one level in the menu by
using the OFF key on the bottom and select the menu item
FILE/PRINT. In the following menu press the soft menu key
SCREENSHOTS. This will assign the function Screenshot to
the FILE/PRINT
17
key with the selected settings. This enab-
les you to generate a screenshot on your USB stick by pres-
sing the FILE/PRINT key at any given time using any menu.
Fig.3.15:Deningalename
Fig. 3.13: Save/Recall menu