User manual

19
Vertical System
4.6 Name a Channel
The last entry NAME in the VERTICAL menu opens a
submenu which allows you to enter a channel name. This
name will be displayed on the grid and the printout. Your
rstoptionistoswitchthedisplayon(ON)oroff(OFF).
The next option includes the menu item LIBRARY. After
selecting this option, you can use the universal knob to
choose a name from several suggestions. The EDIT LA-
BEL key allows you to enter a completely new name or
to customize the suggested name. You may enter up to 8
characters.UsetheACCEPTkeytoconrmthenamein
the editor. It will then be shown in the display. The name
isassignedtothatspecicsignalandwillmovealongside
any set offset value.
Fig. 4.6: Name selection
Fig. 4.5: Threshold setting