User manual

16
Quick Start Guide
the mathematical graph can be calculated and the result
signals can be displayed. Press the bottom soft menu key
FORMULARY. This opens the formula editor to select and
dene5setsofformulaswithupto5mathematical func-
tions each.
To change the settings, use the soft menu keys and the
universal knob
4
.Youcandeneandstorethemostfre-
quently used formulas. After selecting the desired formula
and pressing the soft menu key EDIT, you can edit indivi-
dual formula functions. Once a mathematical function has
beendenedandactivatedbypressingthesoftmenukey
VISIBLE (ON), the short menu for the mathematical func-
tions will display this function. The graph will be marked in
the short menu by a red dot. The sources selected in the
function must be activated so that the mathematical graph
can be calculated and the result signals can be displayed.
3.7 Storing data
The R&S®HMO3000 series is able to store 5 different types
of data:
Device settings
Reference signals
Traces
Screenshots
Formularies
Fig. 3.13: Save/Recall menu
Out of these data types, signals and screen displays can only
be stored on a USB stick. All other data types can be stored
on a USB stick or internally in the instrument to non-volatile
storagemedia.Tostoredatayouhavetodenethedata
type and the destination to be used for storing. First attach
a USB stick to the front USB connector of your oscilloscope.
Press the Save/Recall
12
key to open the respective menu.
Select the type of data you wish to store by pressing the res-
pective soft menu key (in this example SCREENSHOTS). This
will open the settings menu. In the top menu make sure that
Storage Front is selected. Press the soft menu key to open
the menu where you can select these settings. It is impor-
tant to connect a USB stick with the front USB connector of
your oscilloscope which must be recognized by your instru-
ment. Pressing the soft menu key SAVE allows you to save a
screenshotusingthedefaultlename(thecurrentlename
is displayed in the menu item FILE NAME). You can also se-
lectanameforthetargetlewithupto8characters.Select
the menu item FILE NAME and use the universal knob to
enter the name (in this example “TRC”).
Press the soft menu key ACCEPT. The oscilloscope accepts
the name and returns to the settings menu. Here you can
store the current image by pressing the soft menu key SAVE.
Alternatively, you can move up one level in the menu by
using the OFF key on the bottom and select the menu item
FILE/PRINT. In the following menu press the soft menu key
Fig. 3.14: SCREENSHOTS menu
Fig. 3.12: Measuring the parameters of two sources
Fig. 3.15: File naming