Datasheet

Rohde & Schwarz R&S®HMO3000 Series 7
Optional: Logic probe R&S®HO3508
❙ Logic probe R&S®HO3508  ts to all
R&S®HMO series oscilloscopes
(also available as double pack HO3516)
❙ No hardware lock to a speci c device
❙ 8 logic channels available on each logic probe
❙ Signal threshold adjustable for each logic pod
Speci cations R&S®HO3508
Channels 8
Memory depth per channel 4 MPts (R&S®HMO3000 series)
Input impedance 100 kΩ || <4 pF
Max. input frequency 350 MHz
Max. input voltage 40 V (DC + AC)
Thresholds TTL, CMOS, ECL, user-de ned
(-2 V to +8 V)
Measuring category CAT I
Cable length approx. 1 m
Rohde & Schwarz is offering the R&S®HMO3000 series exclusively as a mixed-signal
oscilloscope. The great advantages of these instruments are best illustrated by taking a look
at how ADCs (Analog Digital Converter) or DACs (Digital Analog Converter) are integrated.
These transformer modules include an analog signal on the one side and a digital signal on
the other side. As shown in the image below the latency time of a DAC can be determined
with one simple cursor measurement. Therefore a MSO allows developers to devote their full
attention to the circuit without having to waste energy on the measurement setup.
The active logic probe R&S®HO3508 (also available as double pack HO3516) is available
separately and is not linked to a speci c serial number of an instrument. It can be used with
any R&S®HMO oscilloscope.
14 bit DAC signal change
HMO3000_bro_de-en_3607-0146-3X_v0200.indd 7 29.02.2016 11:23:17