Datasheet

4 Rohde & Schwarz R&S®HMO3000 Series
Model overview
500 MHz 400 MHz 300 MHz
4 channel R&S®HMO3054 R&S®HMO3044 R&S®HMO3034
2 channel R&S®HMO3052 R&S®HMO3042 R&S®HMO3032
Key facts
Superior hardware-based acquisition for precise measurement results
❙ 4 Gsample/s sampling rate, 8 Msample memory depth
❙ High vertical sensitivity down to 1 mV/div
❙ Low-noise measurement due to state-of-the-art A/D converter
❙ High acquisition rate to identify signal faults
❙ Segmented memory and manually adjustable memory depth
Versatile measurement functions and fast results
❙ Wide selection of automatic measurement functions
❙ QuickView: key results at the push of a button
❙ Mask test: a new mask can be easily created with just a few keystrokes
❙ FFT: the easy way to analyze the signal spectrum
Logic analysis with the MSO option
❙ Mixed signal function as standard
❙ Precise triggering on signal events
❙ Straightforward display of digital signals
❙ Low test point loading due to active probe solution
Serial bus analysis: hardware-based triggering and decoding
❙ Versatile trigger options for isolating specic data packets
❙ Color-coded display of decoded bus signals
❙ Direct export of analyzed data to USB memory drive
❙ Simultaneous decoding of two buses in realtime
Application How the R&S®HMO3000 meets your needs
Engineering lab ❙ Adjustable memory depth
❙ Advanced math functions available as standard, math on math possible
❙ Automeasurement for 28 user-defined parameters
❙ Segmented memory (R&S®HOO14, R&S®HV114)
Analog
circuit design
❙ Low-noise amplifier and A/D converter
❙ 1 mV/div. sensitivity
❙ 50 Ω/1 MΩ input impedance, switchable
❙ Bandwidth upgrades via software options
❙ Simultaneous voltmeter measurements on all analog channels
Embedded
debugging
❙ Mixed signal option (MSO) with 16 logic channels
❙ Serial bus trigger and hardware-accelerated decode (R&S®HOO10/11/12,
R&S®HV110/111/112)
❙ 7-digit hardware counter
❙ Superb FFT functionality
Production
environment
❙ Remote control for automated data acquisition
❙ Pass/fail tests based on user-defined masks with error signal output
❙ Automatic signal measurement at the push of a button
❙ USB/RS-232, Ethernet/USB or GPIB (IEEE 488) interfaces
General
purpose and
education
❙ Fast boot time
❙ Low-noise, intelligent temperature management
❙ Extended display size through Virtual Screen technology
❙ DVI-D output for external display
Voltmeter measurements using an oscilloscope
❙ Three-digit display for precise voltage measurements
❙ Simultaneous measurement on all analog channels of up to four voltage
values totalling
Future-ready investment and scalability
❙ Free rmware updates
❙ Bandwidth upgrades as required
❙ Serial bus analysis and segmented memory via optional software licenses
HMO3000_bro_de-en_3607-0146-3X_v0200.indd 4 29.02.2016 11:23:15