Datasheet
12 Rohde & Schwarz R&S®HMO3000 Series
R&S®HMO3002 series 2-channel mixed signal oscilloscope
R&S®HMO3004 series 4-channel mixed signal oscilloscope
R&S®HMO3032, R&S®HMO3034: 300 MHz
R&S®HMO3042, R&S®HMO3044: 400 MHz
R&S®HMO3052, R&S®HMO3054: 500 MHz
from rmware version 5.520
Display
Screen size / type 16.5 cm (6.5 “) VGA Color Display
Resolution 640 (H) x 480 (V) pixel
Backlight 500 cd/m
2
(LED)
Display range in horizontal direction
without menu bar 12 Div (600 pixel)
with menu bar 10 Div (500 pixel)
Display range in vertical
direction
8 Div (400 pixel)
with VirtualScreen usage 20 Div
Color depth 256 colors
Trace display pseudo-color, inverse intensity
Levels of trace brightness 32
Button brightness light, dark
Vertical System
DSO mode
2-channel models CH1, CH2
4-channel models CH1, CH2, CH3, CH4
MSO mode
2-channel models CH1, CH2, POD1, POD2
4-channel models CH1, CH2, CH3|POD1, CH4|POD2
Analog Channels
Y-bandwidth (-3dB)
(1mV, 2mV)/Div R&S®R&S®HMO303x: 180 MHz
R&S®HMO304x, HMO305x: 200 MHz
(5mV bis 5V)/Div
R&S®HMO303x: 300 MHz
R&S®HMO304x: 400 MHz
R&S®HMO305x: 500 MHz
Lower AC bandwidth 2 Hz
Bandwidth limitation
(switchable)
about 20 MHz
Rise time (calculated, 10% to 90%)
R&S®HMO303x < 1.166 ns
R&S®HMO304x < 0.875 ns
R&S®HMO305x < 0.700 ns
DC gain accuracy 2 % of full scale
Input sensitivity
all analog channels 1 mV/Div to 5 V/Div (1 MΩ and 50 Ω)
coarse stepping 12 calibrated steps, 1-2-5
variable stepping freely between calibrated steps
Impedance 1 MΩ II 13 pF ±2 pF (50 Ω switchable)
Coupling DC, AC, GND
Max. input voltage (derates at 20 db/decade to 5 V
rms
above
100 kHz)
1 MΩ 200 V
p
50 Ω 5 V
rms
, max. 30 V
p
Position range ±8 Div (from center of screen)
Offset control
1 mV/Div, 2 mV/Div ±0.2 V - 8 Div x sensitivity
5 mV/Div to 20 mV/Div ±1.0 V - 8 Div x sensitivity
50 mV/Div ±2.5 V - 8 Div x sensitivity
100 mV/Div, 200 mV/Div ±20 V - 8 Div x sensitivity
500 mV/Div to 5 V/Div ±50 V - 8 Div x sensitivity
XY/XYZ mode selectively all analog channels
Inversion selectively all analog channels
Logic Channels (with logic probe R&S®HO3508/HO3516)
Thresholds TTL, CMOS, ECL, user-defined (-2 V to +8 V)
Impedance 100 kΩ || 4 pF
Coupling DC
Max. input voltage 40 V
p
Trigger System
Trigger Mode
Auto Triggers automatically also without any specific
trigger event
Normal Triggers only on specific trigger events
Single Triggers once on a trigger event
Trigger indicator Screen and panel (LED)
Trigger sensitivity
up to 2 mV/Div 1.5 Div
2 mV/Div to 5 mV/Div 1.0 Div
from 5 mV/Div 0.8 Div
external 0.5 V
pp
to 10 V
pp
Trigger level setting
with auto level Linking peak value and trigger level, adjustable
between peak values of a signal
without auto level ±8 Div (from center of screen)
external ±5 V
Trigger coupling
Auto level 5 Hz to 300/400/500 MHz
AC 5 Hz to 300/400/500 MHz
DC DC to 300/400/500 MHz
HF 30 kHz to 300/400/500 MHz
selectable filters
LF DC to 5 kHz, selectable in DC and auto level
mode
low-pass
(noise rejection)
200 MHz, selectable in AC, DC, HF and auto
level mode
Trigger hold-off 50 ns to 17 s
External Trigger Input (BNC)
Impedance 1 MΩ || 14 pF ±2 pF
Sensitivity 0.5 V
pp
to 10 V
pp
Trigger level ±5 V
Max. input voltage 100 V
p
Coupling DC, AC
Trigger/Auxiliary Output (BNC)
Functions Pulse output for every acquisition trigger event,
error output on mask violation
Output level 3.8 V
Pulse polarity positive
Pulse width
>150 ns (trigger event), >0.5 µs (mask violation)
Trigger Types
Edge
Direction increasing, decreasing, both
Trigger coupling auto level AC, DC, HF
Switchable filters LF, noise rejection
Sources all analog and digital channels, mains, external
(AC, DC)
Edge A/B
Direction increasing, decreasing, both
Source A, B all analog channels, external (AC, DC)
Frequency range DC to 300/400/500 MHz
HMO3000_bro_de-en_3607-0146-3X_v0200.indd 12 29.02.2016 11:23:24