Datasheet
Rohde & Schwarz R&S®HMO3000 Series 11
Frequency Analysis
Due to the outstanding FFT functionality of the R&S®HMO series
oscilloscopes signals can also be analysed in the frequency domain with
up to 65,536 points. Additional practical tools such as cursor
measurement as well as peak-detect functions are also available. They
allow engineers to complete their analysis signicantly faster, also in the
frequency domain.
Easy analysis in frequency domain
In the time domain quite often the distortion of input signals cannot be
detected with the naked eye. For instance, an acquired sine wave signal
appears to be undistorted. Only the frequency spectrum – available with
just one push of a button – clearly displays additional harmonics that
occur as harmonic oscillations for multiples of the basic frequency.
Since FFT is also active for previously stored signals, it is possible to
subsequently analyze any sections of those signals captured in single
shot mode or stop mode with an adjustable window width.
Sinusoid signal in the time domain Frequency spectrum exposes the distortion
HMO3000_bro_de-en_3607-0146-3X_v0200.indd 11 29.02.2016 11:23:24