User manual

Preface
R&S
®
Scope Rider RTH
7Getting Started 1326.1561.02 ─ 0301
●
Offset
Offset range depends on input sensitivity:
–
Input sensitivity
≥ 40 V/div: 0
– Input sensitivity ≥ 1 V/div to ≤ 20 V/div: ±200 V
– Input sensitivity ≤ 500 mV/div: ±4 V
Horizontal system
●
Timebase range: selectable between 1 ns/div and 500 s/di
v
●
Timebase accuracy: ±
10 ppm
Acquisition system
●
Maximum realtime sampling rate
1 / 2 / 4 channels active: 5 / 2.5 / 1.25 Gsample/s respectively
●
Acquisition modes: sample, high resolution, peak detect, average, envelope
●
Max. acquisition length
1 / 2 / 4 channels active: 500 / 250 / 125
ksample/channel respectively
Trigger system
●
Trigger modes: auto, normal, single
●
Trigger types:
–
Standard: edge, glitch, width, TV/video (PAL, NTSC, SECAM, PAL-M)
– Optional: TV/video (DTV and HDTV), pattern, state, slew rate, window,
runt, data2clock, serial pattern, timeout, interval, protocol
●
Trigger level ±4 div from center of screen
Analysis features
●
4 active automatic waveform measurements
●
Cursor measurements
●
Mask testing with up to 5 simultaneous masks
●
Waveform mathematics
●
Data logger
●
True RMS Digital Multimeter (R&S RTH1002 only)
– Resolution: 4 digits, 10,000 counts
Main Specifications