Instructions

Strona 278 z 659
Dystrybucja Conrad Electronic Sp. z o.o., ul. Kniaźnina 12, 31-637 Kraków, Polska
Copyright © Conrad Electronic 2012, Kopiowanie, rozpowszechnianie, zmiany bez zgody zabronione.
www.conrad.pl
www.conrad.pl
<sb:FACTOR>1.0</sb:FACTOR>
<!-- Signal Factor (decimal value)-->
<sb:OFFSET>0.0</sb:OFFSET>
<!-- Signal Offset (decimal value)-->
<sb:MIN>0</sb:MIN>
<!-- Minimum Signal Value (decimal value) -->
<sb:MAX>4096</sb:MAX>
<!-- Maximum Signal Value (decimal value) -->
<sb:ENUM-VALUES>
<!-- This block is only valid (and taken into consideration)
when the VALUE-TYPE is ENUM
It defines the Enumeration List Translation of the Signal -->
<sb:ENUM INDEX="0" LABEL="No Error"/>
<!-- INDEX is the Enum Value (corresponds to the Signal Value in decimal),
LABEL is the matching Translated Signal Value -->
<sb:ENUM INDEX="1" LABEL="Channel 1 out of range high"/>
</sb:ENUM-VALUES>
<!-- End of Signal Enumeration List Definition -->
</sb:SIGNAL>
<!-- End of a Signal Definition -->
<!-- More Signals can be defined here! -->
</sb:SIGNALS>
<!-- End of list of Signals Definition -->
</sb:FRAME>
<!-- End of Frame Definition -->
Przykład translacji listy etykiet można znaleźć w rozdziale 9.7.4.1, "SENT Label List Translation
Example".
Rysunek 9-41: Lista etykiet SENT