User manual

Multimeter Measurements
R&S
®
Scope Rider RTH
108User Manual 1326.1578.02 ─ 04
Figure 5-6: Digital multimeter settings
Meter Type
Sets the measurement type for the multimeter.
Meter icon "Meter Type" Description
"V AC" AC voltage measurement
"V DC" DC voltage measurement
"V AC+DC" AC+DC voltage (RMS) measurement
"A AC" AC current measurement
"A DC" DC current measurement
"A AC+DC" AC+DC current (RMS) measurement
"Resistance" Resistance measurement
"Continuity Test" Continuity measurement
"Diode Test" Diode measurement
"Capacitance" Capacity measurement
"Temperature" Temperature measurement (an adapter is required)
"Frequency" Frequency measurement
Resistance Threshold
This setting is only relevant for continuity measurement. If the measured voltage drops
below the "Resistance Threshold", the instrument beeps.
Probe Setting
Sets the sensitivity factor of the current probe for current measurements.
Sets the adapter type for temperature measurements.
Digital Multimeter (R&S
RTH1002)