Instructions

Fernsteuerbefehle
R&S
®
Scope Rider RTH
489Bedienhandbuch 1326.1578.03 ─ 10
Rückgabewerte:
<FrameType> TRSQ | SMSG | EMSG
TRSQ = transmission sequence
SMSG = short serial message
EMSG = enhanced serial message
*RST: TRSQ
Verwendung: Nur Abfrage
15.12 Logikanalysator (R&S RTH-B1 MSO)
LOGic:STATe................................................................................................................ 489
LOGic:THCoupling......................................................................................................... 489
LOGic:GROup<m>:TECHnology..................................................................................... 489
LOGic:GROup<m>:USER...............................................................................................490
LOGic:GROup<m>:THReshold?......................................................................................491
LOGic:GROup<m>:HYSTeresis.......................................................................................491
LOGic:CHANnel<m>:DESKew........................................................................................ 491
POD:STATe?................................................................................................................ 492
LOGic:STATe <State>
Enables or disables the logic channels.
Parameter:
<State> ON | OFF
*RST: OFF
LOGic:THCoupling <ThresCoup>
Couples the threshold and hysteresis settings for the logic channels.
If enabled, all logic channels use the same threshold and hysteresis settings.
If disabled, 2 channel groups are available, which can use different threshold and hys-
teresis settings: D0 - D3, and D4 - D7.
Parameter:
<ThresCoup> ON | OFF
*RST: ON
LOGic:GROup<m>:TECHnology <ThresholdType>
Sets the threshold value for the selected channel group, or for all logic channels.
Logikanalysator (R&S RTH-B1 MSO)