Instructions

Fernsteuerbefehle
R&S
®
Scope Rider RTH
480Bedienhandbuch 1326.1578.03 ─ 10
Parameter:
<PausePulse> NPP | PP | PPFL
PP
Transmits the message with a fixed pulse length, automatically
calculated.
NPP
Transmits the SENT message without pause pulse.
PPFL
Transmits the pause pulse with a user-defined frame length to
obtain a transmission sequence with constant length.
*RST: NPP
BUS:SENT:SFORmat <Format>
Selects the serial message format.
Parameter:
<Format> NONE | SHORt | ENHanced
SHORt = Short serial message.
ENHanced = Enhanced serial message.
NONE = Single transmission sequence.
*RST: NONE
BUS:SENT:TECHnology <ThresholdType>
Sets the threshold values as defined for various signal technologies.
Parameter:
<ThresholdType> CMOS | USER
*RST: USER
BUS:SENT:RDSL <Display>
Selects the display table view mode for the SENT protocol.
Parameter:
<Display> TRSQ | SMSG
TRSQ: fast channel
SMSG: slow channel
*RST: TRSQ
15.11.7.2 SENT-Trigger
TRIGger:SENT:TYPE.....................................................................................................481
TRIGger:SENT:DATA.....................................................................................................481
TRIGger:SENT:DCONdition............................................................................................ 481
TRIGger:SENT:ICONdition..............................................................................................481
Protokollanalyse