Instructions

Fernsteuerbefehle
R&S
®
Scope Rider RTH
459Bedienhandbuch 1326.1578.03 ─ 10
TRIGger:CAN:IDENtifier <Pattern>
Specifies the identifier pattern to be found, in binary format. Enter the pattern in MSB
first bit order.
Parameter:
<Pattern> String that contains the pattern in binary format. The parameter
accepts the bit value X (don't care).
Beispiel:
TRIG:CAN:TYPE ID
TRIG:CAN:IDEN 001001
TRIG:CAN:ICON EQU
Triggers if the ID of the measured signal is 001001.
TRIGger:CAN:ITYPe <IdentifierType>
Selects the length of the identifier.
Parameter:
<IdentifierType> B11 | B29 | ANY
ANY
The ID type and ID pattern are not relevant for the trigger condi-
tion.
If the trigger type is „Identifier“, the instrument triggers on any
identifier in the specified frame type.
If the trigger type is „Identifier + Data“, set the „ID type“ to „Any“
if you want to trigger only on data.
*RST: ANY
TRIGger:CAN:TYPE <TriggerType>
Depending on the selected CAN trigger type, different additional parameters are avai-
lable.
Protokollanalyse