Instructions

Fernsteuerbefehle
R&S
®
Scope Rider RTH
457Bedienhandbuch 1326.1578.03 ─ 10
TRIGger:CAN:FDATa:ESI...............................................................................................460
TRIGger:CAN:FDATa:FDF..............................................................................................461
TRIGger:CAN:FDATa:SCERror....................................................................................... 461
TRIGger:CAN:ACKerror <AckError>
An acknowledgement error occurs when the transmitter does not receive an acknow-
ledgment - a dominant bit during the Ack slot.
Parameter:
<AckError> ON | OFF
*RST: ON
TRIGger:CAN:BITSterror
<StuffBitError>
A stuff error occurs when the 6th consecutive equal bit level in the mentioned fields is
detected.
Parameter:
<StuffBitError> ON | OFF
*RST: ON
TRIGger:CAN:CRCerror <CrcError>
A CRC error occurs when the calculated result differs from the received value in the
CRC sequence.
Parameter:
<CrcError> ON | OFF
*RST: ON
TRIGger:CAN:DATA <Pattern>
Specifies the data pattern to be found, in binary or hex format. Enter the pattern in
MSB first bit order.
Parameter:
<Pattern> String that contains the pattern in binary format. The parameter
accepts the bit value X (don't care).
TRIGger:CAN:DCONdition <Relation>
Defines how the specified data pattern is compared with the acquired signal. The
instrument triggers if the acquired address is equal or unequal the defined pattern.
Parameter:
<Relation> EQUal | NEQual
*RST: EQUal
Protokollanalyse