Instructions

Fernsteuerbefehle
R&S
®
Scope Rider RTH
421Bedienhandbuch 1326.1578.03 ─ 10
Parameter:
<Enabled> ON | OFF
*RST: OFF
LOGGer:CURSor:TYPE <Value>
If data logging is running for more than 2 Tage und 7 Stunden, the logger compresses
4 logging values into a minimum, average and maximum value. The command defines
which of these values are measured at the cursor position.
For logging periods shorter than 2 Tage und 7 Stunden, the command is not relevant.
Parameter:
<Value> MINimum | AVERage | MAXimum
*RST: AVERage
LOGGer:CURSor:SCPLing
<TrackScaling>
If ON, the position of the cursor lines is adjusted when the horizontal scale is changed.
If OFF, the cursor lines remain on their position on the display when the scaling is
changed.
Parameter:
<TrackScaling> ON | OFF
*RST: OFF
LOGGer:CURSor:COUPling <Coupling>
Couples the cursor lines so that the distance between the two lines remains the same
when one cursor is moved.
Parameter:
<Coupling> ON | OFF
*RST: OFF
LOGGer:CURSor:SCReen
Sets the cursors to a default position on the screen.
Verwendung:
Ereignis
15.10.3.2 Cursor-Ergebnisse
LOGGer:CURSor<m>:RESult<n>[:AMPLitude]?................................................................422
LOGGer:CURSor:RESult<n>:DELTa?..............................................................................422
LOGGer:CURSor<m>:POSition.......................................................................................422
LOGGer:CURSor:TDELta?............................................................................................. 422
Daten-Logging