Instructions

Fernsteuerbefehle
R&S
®
Scope Rider RTH
414Bedienhandbuch 1326.1578.03 ─ 10
Parameter:
<MeterRangeUI> Bereich: 0.1 bis 300
Inkrement: 0.1
*RST: 0.1
COUNter<m>:SENSe:REFerence:STATe <ReferenceSource>
Selects the reference to be used for the counter.
Suffix:
<m>
.
1..2
Parameter:
<ReferenceSource> INTernal | EXTernal
EXTernal
The measured value of counter 2 is used as a reference. Specify
the nominal reference frequency for counter 2 using
COUNter<m>:SENSe:REFerence:VALue.
INTernal
An internal reference is used to determine the counter fre-
quency.
*RST: INTernal
COUNter<m>:SENSe:REFerence:VALue <RefFreq>
Defines the nominal frequency value to be used as a reference for counter 2.
Suffix:
<m>
.
1..2
Parameter:
<RefFreq> Bereich: 10 bis 500E+6
Inkrement: 1
*RST: 10E+6
Std-einheit: Hz
COUNter<m>:SENSe:SOURce <InputChannel>
Selects the channel used for input for the selected counter.
Suffix:
<m>
.
1..2
Parameter:
<InputChannel> C1 | C2 | C3 | C4
*RST: C1
COUNter<m>:SENSe:STATe <State>
Activates or deactivates the counter.
Zähler-Modus (R&S
RTH-K33)