Instructions

Fernsteuerbefehle
R&S
®
Scope Rider RTH
372Bedienhandbuch 1326.1578.03 ─ 10
Beispiel:
HARM:LIM:NAME
'/media/SD/Rohde-Schwarz/RTH/Harmonic/LimitExample.csv'
HARM:LIM:LOAD
Verwendung: Ereignis
HARMonic:LIMits:NAME <FileName>
Parameter:
<FileName> String containing the path and name of the user-defined configu-
ration file to be loaded.
Beispiel:
HARM:LIM:NAME
'/media/SD/Rohde-Schwarz/RTH/Harmonic/LimitExample.csv'
HARM:LIM:LOAD
HARMonic:LIMits:TYPE <Type>
Defines the type of limit check to be performed.
Parameter:
<Type> NONE | EN50160 | USER
NONE
No limit check is performed.
EN50160
Limits are checked according to the predefined values in the
EN50160 standard.
USER
Limits are checked according to the values in a user-defined file
(see HARMonic:LIMits:LOAD auf Seite 371). For details on
the required file format see Kapitel 6.3.6.1, "Grenzwertdateifor-
mat", auf Seite 147.
*RST:
NONE
HARMonic:SCALe <Unit>
Switches the scale for the measured harmonic levels between logarithmic (db) and
linear (percent). The values are relative to the level measured for the fundamental fre-
quency, or to the level measured for the entire signal, depending on the selected THD
type (see HARMonic:THDType auf Seite 373).
Parameter:
<Unit> PERCent | DB
*RST: DB
HARMonic:STATistic <Type>
By default, the numeric results indicate the currently measured values. Optionally, you
can switch to the minimum or maximum values.
Spektrumanalyse